MBR1060 SWITCHMODE Power Rectifiers Features GuardRing for Stress Protection MBR1060 MAXIMUM RATINGS Rating Symbol MBR1060 Unit Peak Repetitive Reverse Voltage V 60 V RRM Working Peak Reverse Voltage V RWM DC Blocking Voltage V R Average Rectified Forward Current (Rated V ) T = 133C I 10 A R C F(AV) Peak Repetitive Forward Current I 20 A FRM (Rated V , Square Wave, 20 kHz) T = 133C R C Nonrepetitive Peak Surge Current I 150 A FSM (Surge applied at rated load conditions halfwave, single phase, 60 Hz) Peak Repetitive Reverse Surge Current (2.0 s, 1.0 kHz) I 0.5 A RRM Operating Junction Temperature (Note 1) T 65 to +175 C J Storage Temperature T 65 to +175 C stg Voltage Rate of Change (Rated V ) dv/dt 10,000 V/ s R Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 1. The heat generated must be less than the thermal conductivity from JunctiontoAmbient: dP /dT < 1/R . D J JA THERMAL CHARACTERISTICS Maximum Thermal Resistance, JunctiontoCase R 2.0 C/W JC Maximum Thermal Resistance, JunctiontoAmbient R 60 C/W JA ELECTRICAL CHARACTERISTICS Maximum Instantaneous Forward Voltage (Note 2) v V F (i = 10 Amps, T = 125C) 0.7 F C (i = 10 Amps, T = 25C) 0.8 F C (i = 20 Amps, T = 125C) 0.85 F C (i = 20 Amps, T = 25C) 0.95 F C Maximum Instantaneous Reverse Current (Note 2) i mA R (Rated dc Voltage, T = 125C) 22 C (Rated dc Voltage, T = 25C) 0.10 C 2. Pulse Test: Pulse Width = 300 s, Duty Cycle 2.0%.