SZESD7008MUTAG ON Semiconductor

ESD7008, SZESD7008 ESD Protection Diode Low Capacitance ESD Protection Diode for High Speed Data Line The ESD7008 ESD protection diode is designed specifically to www.onsemi.com protect four high speed differential pairs. Ultralow capacitance and low ESD clamping voltage make this device an ideal solution for MARKING protecting voltage sensitive high speed data lines. The flowthrough DIAGRAM 18 style package allows for easy PCB layout and matched trace lengths necessary to maintain consistent impedance for the high speed lines. 1 7008M UDFN18 Features CASE 517BV Integrated 4 Pairs (8 Lines) High Speed Data 7008 = Specific Device Code Single Connect, Flow through Routing M = Date Code Low Capacitance (0.12 pF Typical, I/O to GND) = PbFree Package Protection for the Following IEC Standards: (Note: Microdot may be in either location) IEC 6100042 Level 4 UL Flammability Rating of 94 V0 ORDERING INFORMATION SZ Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements AECQ101 Qualified and Device Package Shipping PPAP Capable ESD7008MUTAG UDFN18 3000 / Tape & This is a PbFree Device (PbFree) Reel Typical Applications SZESD7008MUTAG UDFN18 3000 / Tape & (PbFree) Reel VbyOne HS Thunderbolt (Light Peak) For information on tape and reel specifications, including part orientation and tape sizes, please USB 3.0 refer to our Tape and Reel Packaging Specification HDMI Brochure, BRD8011/D. Display Port LVDS MAXIMUM RATINGS (T = 25C unless otherwise noted) J Rating Symbol Value Unit Operating Junction Temperature Range T 55 to +125 C J Storage Temperature Range T 55 to +150 C stg Lead Solder Temperature T 260 C L Maximum (10 Seconds) IEC 6100042 Contact (ESD) ESD 15 kV IEC 6100042 Air (ESD) ESD 15 kV Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. See Application Note AND8308/D for further description of survivability specs. Semiconductor Components Industries, LLC, 2016 1 Publication Order Number: October, 2017 Rev. 7 ESD7008/DESD7008, SZESD7008 I/O I/O I/O I/O I/O I/O I/O I/O Pin 1 Pin 2 Pin 4 Pin 5 Pin 7 Pin 8 Pin 10 Pin 11 GND GND GND GND GND GND Pin 3 Pin 6 Pin 9 Pin 13 Pin 15 Pin 17 Note: Only Minimum of 1 GND connection required = Figure 1. Pin Schematic I/O 1 N/C 18 I/O 2 N/C GND 3 17 GND I/O 4 16 N/C I/O 5 GND 6 N/C 15 GND I/O 7 14 N/C I/O 8 N/C GND 9 13 GND I/O 10 12 N/C I/O 11 Figure 2. Pin Configuration Note: Only minimum of one pin needs to be connected to ground for functional- ity of all pins. All pins labeled N/C should have no electrical connection. www.onsemi.com 2