POE21-120F-R Phihong

WWW.PHIHONG.COM DC-DC Power over Ethernet Splitter 30W and 12VDC for Heaters, Illuminators and POE Cameras Features Compatible with POE75U-1UP-R Power IEEE802.3af Camera DC Good LED Full Protection OTP, OCP, OVP Non-Vented Case Gigabit Compatible DC Power and PoE/Data Output 1 Year Warranty No 2 Finger Classification Applications IP Cameras Heaters and Illuminators Access Controls Safety Approvals CE Mechanical Characteristics Length: 100mm (3.937in) Height: 28mm (1.098in) Width: 56mm (2.205in) Weight: 0.142Kg (0.313lb) Output Specifications Output Power PoE Load DC Load Model PoE DC Min Max Min Max 25.5W at POE21-120F-R* 21W at 12VDC 15mA 600mA 0.0A 1.75A 42.5-57VDC *Model will not operate without Ultra PoE Power Injector or better Reference files: POE21 user manual.pdf Phihong is not responsible for any error, and reserves the right to make changes without notice. Please visit our website at www.phihong.com for the most up-to-date specifications and contact information Revision 5/1/2020 POE21-120F-R Characteristics WWW.PHIHONG.COM INPUT: Unit receives power from Phihong Ultra PoE Dielectric withstand (HI-POT) Test Midspans using Cat 5e or Cat 6 wiring up to Primary to secondary: 2121VDC for 1 minute, 100 meters per IEEE802.3. For information on 10mA Ultra PoE Midspans please go to Insulation Resistance www.midspans.com Primary to Secondary: >10M Ohm 500V DC DC Input Current FEATURES: 0.7A (DC) and 45VDC at maxload Indicators GREEN LED Output power ON DC Input Voltage Rating 45 57VDC for 12V Cable Pass through POE 42.5-7V Designed to operate up to 100 meters per IEEE 802.3, CAT 5e or CAT6 OUTPUT: Regulation Input and Output Data Connector Line and Load 2% RJ45 Ripple Output Connector o 120mV max at 25 C on 12V POE and data RJ45 Jack Efficiency DC Output 80% min at max load 48Vinput Center Positive Barrel 12mm x 2.1mm ID x 5.5mm OD.Tip is user changeable for other sizes O/P Voltage Protection In case of output over voltage overload, crowbar will short. The output can be shorted permanently without damage. ENVIRONMENTAL: Temperature Operation 0 to +40C Non-operation -20 to +65C Humidity 5 to 90% Immunity ESD: EN61000-4-2. Level 3 RS: EN61000-4-3. Level 2 Note: RS and CS tested with POE60U EMC EN55022 Class A FCC Part 15, Class A