2SP0115T2Ax-FF600R12ME4 2SP0115T2Ax-FF600R12ME4 Preliminary Data Sheet Compact, high-performance, plug-and-play dual-channel IGBT driver based on SCALE-2 technology for individual and parallel-connected modules Abstract The SCALE-2 plug-and-play driver 2SP0115T2Ax-FF600R12ME4 is a compact dual-channel intelligent gate TM driver designed for Infineons EconoDUAL IGBTs FF600R12ME4. The driver features an electrical interface with a built-in DC/DC power supply. For drivers adapted to other types of high-power and high-voltage IGBT modules, refer to www.IGBT-Driver.com/go/plug-and-play Features Applications Plug-and-play solution Wind-power converters Allows parallel connection of IGBT modules Industrial drives Shortens application development time UPS Extremely reliable long service life Power-factor correctors Built-in DC/DC power supply Traction 20-pin flat cable interface Railroad power supplies Duty cycle 0... 100% Welding Active clamping of V at turn-off SMPS ce IGBT short-circuit protection Radiology and laser technology Monitoring of supply voltage Research Safe isolation to EN 50178 and many others UL compliant Suitable for FF600R12ME4 EconoDUAL is a trademark of Infineon Technologies AG, Munich IGBT-Driver.com Page 1 2SP0115T2Ax-FF600R12ME4 Preliminary Data Sheet Safety Notice The data contained in this data sheet is intended exclusively for technically trained staff. Handling all high- voltage equipment involves risk to life. Strict compliance with the respective safety regulations is mandatory Any handling of electronic devices is subject to the general specifications for protecting electrostatic-sensitive devices according to international standard IEC 60747-1, Chapter IX or European standard EN 100015 (i.e. the workplace, tools, etc. must comply with these standards). Otherwise, this product may be damaged. Important Product Documentation This data sheet contains only product-specific data. For a detailed description, must-read application notes and common data that apply to the whole series, please refer to Description & Application Manual for 2SP0115T SCALE-2 IGBT Drivers on www.IGBT-Driver.com/go/2SP0115T. When applying SCALE-2 plug-and-play drivers, please note that these drivers are specifically adapted to a particular type of IGBT module. Therefore, the type designation of SCALE-2 plug-and-play drivers also includes the type designation of the corresponding IGBT module. These drivers are not valid for IGBT modules other than those specified. Incorrect use may result in failure. Mechanical Dimensions Dimensions: See Description & Application Manual for 2SP0115T SCALE-2 IGBT Drivers TM Mounting principle: Soldered onto EconoDUAL module FF600R12ME4 Absolute Maximum Ratings Parameter Remarks Min Max Unit Supply voltage V VCC to GND 0 16 V CC Logic input and output voltages To GND -0.5 VCC+0.5 V SO current Fault condition, total current 20 mA x Gate peak current I Note 1 -8 +15 A out Average supply current I Note 2 290 mA CC Output power per gate Ambient temperature <70C (Note 3) 1.2 W Ambient temperature 85C (Note 3) 1 W Switching frequency F 14 kHz Test voltage (50Hz/1min.) Primary to secondary (Note 17) 3800 V AC(eff) Secondary to secondary (Note 17) 3800 V AC(eff) DC-link voltage Note 4 800 V dV/dt Rate of change of input to output voltage (Note 5) 50 kV/ s Operating voltage Primary/secondary, secondary/secondary 1200 V peak Operating temperature Note 20 -20 +85 C Storage temperature -40 +90 C Page 2 INTELLIGENT POWER ELECTRONICS