QPC6014 Absorptive High Isolation SPST Switch Classification PRIVATE Product Description The QPC6014 is a Silicon on Insulator (SOI) single-pole single-throw (SPST) absorptive switch designed for use in cellular, 3G, LTE and other high-performance communications systems. It offers high isolation with excellent linearity and power handling capability. No blocking capacitors are necessary on the RF ports. The design is non-reflective such that the RF2 port is terminated 8-pin, 2.0mm x 2.0mm DFN Package into 50Ohms in the off state. The QPC6014 is +1.8V positive logic compatible. Product Features 5MHz to 6000MHz Operation Non-Reflective (RF2) Functional Block Diagram No Blocking Capacitors Necessary Unless Voltage is on RF Line High Isolation: 53dB at 2GHz High Input IP3: +58dBm 2kV ESD +1.8V Logic Compatible Applications I Cellular, 3G, LTE Infrastructure High Performance Communications Systems Test Equipment Ordering Information Part No. Description QPC6014TR7 7 Reel with 2500 pcs 5MHz to 6000MHz PCBA with 5pcs QPC6014PCK401 sample bag Datasheet Rev E July 23, 2020 Subject to change without notice 1 of 11 www.qorvo.com QPC6014 Absorptive High Isolation SPST Switch Classification PRIVATE Absolute Maximum Ratings Recommended Operating Conditions Parameter Value Units Parameter Min Typ Max Units Supply Voltage VDD +6 V Package Backside Pad Temperature 40 +105 C Control Voltage VC +6 V Switching Transistor Junction Temperature +125 C RF1 or RF2 Input Power, Supply Voltage VDD +2.7 +3.0 +5.5 V +37 dBm CW, On-State < 500MHz, +85C +30.5 dBm RF1 Input Power, +32 dBm > 500MHz, +85C +35.0 dBm RF1 or RF2 Input Power, CW, Off-State, Reflective CW, On-State RF2 Input Power, < 500MHz, +105C +27.5 dBm +29 dBm CW, Off-State, Absorptive > 500MHz, +105C +32.0 dBm Storage Temperature 40 to +150 C +85C +28.5 dBm RF2 Input Power, Exceeding any one or a combination of the Absolute Maximum CW, Off-State +105C +25.5 dBm Rating conditions may cause permanent damage to the device. Extended application of Absolute Maximum Rating conditions to Recommendations are based on measurement at specified conditions. There is no the device may reduce device reliability. Specified typical guarantee over all combinations of operating condition. In common switch applications, performance or functional operation of the device under Absolute the maximum input power could be limited by a lower level specified in Off-State or On- Maximum Rating conditions is not implied. State. Electrical Specifications (1) Parameter Conditions Min Typ Max Units Operational Frequency Range 5 6000 MHz 450MHz 0.63 900MHz 0.68 0.83 Insertion Loss V =+3.3V 2100MHz 0.84 dB CTRL ( RF1 to RF2 On-State) 2600MHz 0.89 0.98 4000MHz 1.05 450MHz 70 900MHz 45 64 Isolation Loss V =0V 2100MHz 53 dB CTRL ( RF1 to RF2 Off-State) 2600MHz 35 51 4000MHz 43 450MHz 20 900MHz 20 Return Loss VCTRL=+3.3V 2100MHz 20 dB (RFX On-State) 2600MHz 20 4000MHz 20 450MHz 20 900MHz 20 Return Loss VCTRL=0V 2100MHz 20 dB (RF2 Off-State) 2600MHz 20 4000MHz 20 Notes: 1. Test conditions unless otherwise noted: V =+5V Temp.=+25C, 50 system DD , Datasheet Rev E July 23, 2020 Subject to change without notice 2 of 11 www.qorvo.com