RFFM4554SR Qorvo

RFMD + TriQuint = Qorvo RFFM4554 RFFM4554 Wi-Fi Integrated Front End Module 4.9GHz to 5.925GHz Package: QFN, 16-pin, 2.3mm x 2.3mm x 0.45mm The RFFM4554 is a front end module (FEM) designed for 802.11a/n/ac Features applications. The integrated single-pole double throw switch and low 13.5dB LNA Gain noise amplifier with bypass greatly reduces the layout area, bill of materials and manufacturability cost in the customer application. The 5dB Bypass Loss RFFM4554 has a unique structure where the switch to LNA path has pins 1.7dB Noise Figure so filtering can be added in the ideal path for current Wi-Fi circuit TX to ANT path loss of 0.5dB applications. The device is provided in a 2.3mm x 2.3mm x 0.45mm 16- Max Power at TX Input of 30dBm pin QFN package that meets or exceeds the power requirements of 2.4GHz Rejection IEEE802.11a/n/ac Wi-Fi RF systems. Input and Output Matched to 50 Break out path between switch and LNA for optimal filter placement Applications Customer Premise Equipment (CPE) Wireless Access Points, Gateways Routers Set-Top Box Applications Picocell/Femtocell Internet of Things Functional Block Diagram Ordering Information RFFM4554SB Standard 5-piece Sample Bag RFFM4554SQ Standard 25-piece Sample Bag RFFM4554SR Standard 100-piece Reel RFFM4554TR7 Standard 2500-piece Reel RFFM4554PCK401 Fully Assembled Evaluation Board Revision DS20160930 Brief Disclaimer: Subject to change without notice 1 of 2 2016 RF Micro Devices, Inc. www.rfmd.com / www.qorvo.com RFMD + TriQuint = Qorvo Pin Names and Descriptions Pin Name Description 1 C0 Control pin 0. See truth table for proper voltage level. 2 RX RF output port for the RX throw of the T/R switch. This port is matched to 50 and AC coupled internally 3 GND Ground connection 4 LNAIN RF input port for the LNA. This port is matched to 50 and AC coupled internally 5 GND Ground connection 6 LNAOUT RF output port for the LNA. This port is matched to 50 and AC coupled internally 7 GND Ground connection 8 VCC Supply voltage for the module. See applications schematic for bypassing components. 9 GND Ground connection 10 GND Ground connection 11 TX RF input port for the TX throw of the T/R switch. This port is matched to 50 and AC coupled internally 12 C1 Control pin 1. See truth table for proper voltage level. 13 GND Ground connection 14 GND Ground connection 15 ANT RF bidirectional antenna port matched to 50 and AC coupled 16 GND Ground connection Ground connection. The back side of the package should be connected to the ground plan though as short of Pkg Base GND a connection as possible. PCB vias under the device are recommended. Revision DS20160930 Brief Disclaimer: Subject to change without notice 2 of 2 2016 RF Micro Devices, Inc. www.rfmd.com / www.qorvo.com