TGC4405-SM 17 - 27 GHz Packaged Upconverter Key Features RF Output Frequency Range: 17 - 27 GHz LO Input Frequency Range: 8 - 13 GHz IF Input Frequency Range: 0.5 - 3 GHz 13 dB Conversion Gain 28 dBm OTOI Bias: Vd = 5 V, Idq = 425 mA Package Dimensions: 4 x 4 x 0.9 mm Measured Performance Primary Applications Vd = 5V, Idq = 425mA, Vmxr = Vdbl = -0.9V Point-to-Point Radio IF = 2GHz -8dBm, +2dBm LO K Band Sat-Com Product Description The TriQuint TGC4405-SM is an upconverter with RF output frequencies of 17 to 27 GHz. It contains a frequency doubler and local oscillator (LO) amplifier, operating at LO input frequencies of 8 - 13 GHz. The TGC4405-SM is in a compact 4 mm x 4 mm package footprint. The TGC4405-SM nominally provides 13 dB conversion gain and 28 dBm OTOI when operated with LO inputs from 2 - 5 dBm. Vd = 5V, Idq = 425mA, Vmxr = Vdbl = -0.9V The TGC4405-SM is ideally suited for low cost markets IF = 2GHz +/- 5MHz -8dBm Input/Tone, +2dBm LO such as Point-to-Point Radio, and K-band Sat-Com. The TGC4405-SM has a protective surface passivation layer on the MMIC providing environmental robustness. Lead-free and RoHS compliant. Datasheet subject to change without notice. 1 TriQuint Semiconductor: www. triquint.com (972)994-8465 Fax (972)994-8504 Info-mmw tqs.com April 2012 Rev ATGC4405-SM Table I Absolute Maximum Ratings 1/ Symbol Parameter Value Notes Vd-Vg Drain to Gate Voltage 12 V Vd Drain Supply Voltage 8 V 2/ Vmxr Mixer Supply Voltage Range -5 to 0 V Vdbl Doubler Supply Voltage Range -5 to 0 V Vg Gate Supply Voltage Range -5 to 0 V Id Drain Supply Current 817 mA 2/ Ig Gate Supply Current Range -3.3 to 56.7 mA Imxr Mixer Supply Current Range -0.75 to 10.5 mA Idbl Doubler Supply Current Range -0.6 to 16.8 mA Pin LO Input Continuous Wave Power 18 dBm 2/ LO Pin IF Input Continuous Wave Power 21 dBm 2/ IF 1/ These ratings represent the maximum operable values for this device. Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device and / or affect device lifetime. These are stress ratings only, and functional operation of the device at these conditions is not implied. 2/ Combinations of supply voltage, supply current, input power, and output power shall not exceed Pd (as listed in Thermal Information). Table II Recommended Operating Conditions Symbol Parameter Value Vd Drain Voltage 5 V Idq Drain Current 425 mA Vg Gate Voltage -0.5 V, typical Vmxr Mixer Voltage -0.9 V Vdbl Doubler Voltage -0.9 V See assembly diagram for bias instructions. 2 TriQuint Semiconductor: www. triquint.com (972)994-8465 Fax (972)994-8504 Info-mmw tqs.com April 2012 Rev A