TGC4603-SM Ka-band Doubler with 1 Watt Amplifier General Description The Qorvo TGC4603-SM packaged MMIC combines a frequency doubler with a multi-stage amplifier, operating at input frequencies of 13.5 - 16 GHz. With greater than 70 dBc isolation between the input and the doubled output frequency, the TGC4603-SM achieves more than 1 Watt output power, with only 3 dBm input power. This performance makes this doubler ideally suited for Ka-Band satellite ground terminal applications. The TGC4603-SM provides the frequency doubling function in a compact 5 mm x 5 mm package footprint. 28 - pin 5 x 5 mm QFN package The TGC4603-SM is RoHS compliant. Product Features RF Output Frequency Range: 27 32 GHz Input Frequency Range: 13.5 16 GHz Functional Block Diagram 31.5 dBm Pout 70 dBc Input Frequency Isolation Bias: VD1 = VD2 = 6 V, ID1 + ID2 = 1100 mA, VDX2 = 6 V, IDX2 = 100 mA, VGX2 = -1.2 V, VGPA = -0.6 V Typical Package Dimensions: 5 x 5 x 1.3 mm Performance is typical across frequency. Please reference electrical specification table and data plots for more details. Applications Ka-band VSAT Ordering Information Part Description 1094294 TGC4603-SM T/R, Ka 1W X2PA, 2500 Piece 1129583 TGC4603-SM EVB Data Sheet Rev. C, June 2020 Subject to change without notice 1 of 12 www.qorvo.com TGC4603-SM Ka-band Doubler with 1 Watt Amplifier Absolute Maximum Ratings Recommended Operating Conditions Parameter Value/Range Parameter Min Typ. Max Units Drain Voltage, VD1, VD2, VDX2 6.5 V VD1, VD2, VDX2 6 6.5 V Gate Voltage, VGPA, VGX2 -2.5 to 0.5 V ID1+ID2 (P = 3 dBm) 1100 mA IN Drain to Gate Voltage 12 V IDX2 125 mA Drain Current, ID1 500 mA VGPA -0.6 V Drain Current, ID2 1400 mA VGX2 -1.2 V Gate Current, IGPA -5 to +20 IGPA 6 mA Gate Current, IGX2 -5 to +20 IGX2 0.1 mA RF CW Input Power 18 dBm Electrical performance is measured under conditions noted in Channel Temperature, Tch 200 C the electrical specifications table. Specifications are not guaranteed over all recommended operating conditions. Mounting Temperature (30 sec) 260 C Storage Temperature -40 to 150 C Exceeding any one or a combination of the Absolute Maximum Rating conditions may cause permanent damage to the device. Extended application of Absolute Maximum Rating conditions to the device may reduce device reliability. Electrical Specifications Test conditions unless otherwise noted: 25 C, VD1 = VD2 = VDX2 = 6 V, ID1 + ID2 = 1100 mA, IDX2 = 125 mA, VGX2 = -1.2 V, VGPA = -0.6 V typical. Parameter Min Typical Max Units Input Frequency 13.5 16 GHz Output Frequency 27 32 GHz Output Power, PIN = 3 dBm 31.5 dBm Fundamental Output Rejection 75 dBc Third Harmonic Output Rejection 70 dBc Input Return Loss -10 dB Output Return Loss -10 dB Data Sheet Rev. C, June 2020 Subject to change without notice 2 of 12 www.qorvo.com