TGL2206 Qorvo

TGL2206SM 2.05.5 GHz 100 Watt VPIN Limiter Product Overview The Qorvo TGL2206-SM is a high power, wideband GaAs VPIN limiter capable of protecting sensitive receive channel components against high power incident signals. The TGL2206-SM does not require DC bias and achieves a low insertion loss all in a small form factor. These features allow for simple integration with minimal impact to system performance. The TGL2206-SM operates from 2.0 to 5.5 GHz with low insertion loss of less than 1.0 dB. It can limit up to 100 W incident pulsed power with a low flat leakage of less than 15.5 dBm. 5mm x5mm Air Cavity QFN Package The TGL2206-SM is offered in a 5x5 mm air-cavity QFN packaged limiter comprised of an aluminum-nitride base with a plastic epoxy-sealed lid. It is well suited for both commercial and defense related applications. Key Features Frequency Range: 2.0 to 5.5 GHz Lead-free and RoHS compliant. Insertion Loss: < 1.0 dB Peak Power Handling: 100 W (pulsed) Flat Leakage: < 15.5 dBm Passive (no DC bias required) Integrated DC Block on Output Spike Leakage < 16 dBm Functional Block Diagram Recovery Time < 115 ns Package Dimensions: 5.0 x 5.0 x 1.45 mm Performance is typical across frequency. Please reference electrical specification table and data plots for more details. Applications Receive Chain Protection Commercial and Military Radar Ordering Information Part Description 2.0 to 5.5 GHz 100W TGL2206-SM VPIN Limiter Top View 2.0 to 5.5 GHz 100W TGL2206-SMEVB-01 VPIN Limiter EVB Data Sheet Rev. D, June 2020 Subject to change without notice 1 of 8 www.qorvo.com TGL2206SM 25.5 GHz 100 Watt VPIN Limiter Absolute Maximum Ratings Recommended Operating Conditions Parameter Min Typ. Max Units Parameter Rating Passive No Bias Incident Power, CW or Pulsed, 50 , 25 C 100 W Operating Temperature Range -40 +25 +85 C 70 W Incident Power, CW or Pulsed, 50 , 85 C Electrical specifications are measured at specified test conditions. Mounting Temperature Specifications are not guaranteed over all recommended operating 260 C conditions. (30 seconds max) Storage Temperature -40 to 150 C Exceeding any one or a combination of the Absolute Maximum Rating conditions may cause permanent damage to the device. Extended application of Absolute Maximum Rating conditions to the device may reduce device reliability. Electrical Specifications Parameter Min Typical Max Units Operational Frequency Range 2 5.5 GHz Insertion Loss < 1.0 dB Input Return Loss 15 dB Output Return Loss 15 dB Flat Leakage Power at PIN > 30 dBm < 15 dBm Pulse Recovery Time < 115 ns Spike Leakage < 16 dBm Insertion Loss Temperature Coefficient 0.003 dB / C Notes: Test conditions unless otherwise noted: Temp=+25C, Tuned EVB Results. Thermal and Reliability Information Parameter Test Conditions Value Units Frequency = 4.5 GHz 50 W RF CW, 50 , 25 C Incident Power (1) (168 Hours RF Operational Life Test ) Frequency = 4.5 GHz 100 W RF Pulsed, PW=10 s, DC=10%, 50 , 25 C Notes: (1) Test terminated after 168 hours. Insertion Loss remained 1 dB for device under test. Data Sheet Rev. D, June 2020 Subject to change without notice 2 of 8 www.qorvo.com