DATA SHEET SMP1352 Series: Large Signal Switching, Plastic Packaged PIN Diodes Applications Large signal switches in base stations and handsets Features Packages rated MSL1, 260 C per JEDEC J-STD-020 Skyworks Green products are compliant with all applicable legislation and are halogen-free. For additional information, refer to Skyworks Denition of Green, document number SQ04-0074. Description The SMP1352 series of plastic packaged, surface mountable low capacitance (0.3 pF) silicon PIN diodes is designed for large signal switch applications from 10 MHz to more than 10 GHz. These diodes have a reverse voltage rating of 200 V and are designed for use in low-distortion switches that are required to hold off large RF voltages. The nominal 50 m I-region width, combined with the typical 1.5 s carrier lifetime, results in a PIN diode with low forward resistance and low distortion characteristics. Table 1 describes the various packages and marking of the SMP1352 series. Skyworks Solutions, Inc. Phone 781 376-3000 Fax 781 376-3100 sales skyworksinc.com www.skyworksinc.com 200052M Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice May 20, 2015 1 DATA SHEET SMP1352 SERIES DIODES Table 1. SMP1352 Series Packaging and Marking Single Single Series Pair Single SC-79 SOD-323 SOT-23 SOD-882 Green Green Green Green SMP1352-079LF SMP1352-011LF SMP1352-005LF SMP1352-040LF Marking: Cathode Marking: RR Marking: RR2 Marking: S LS = 0.7 nH LS = 1.5 nH LS = 1.5 nH LS = 0.45 nH The Pb-free symbol or LF in the part number denotes a lead-free, RoHS-compliant package unless otherwise noted as Green. Tin/lead (Sn/Pb) packaging is not recommended for new designs. Table 2. SMP1352 Series Absolute Maximum Ratings (Note 1) Parameter Symbol Minimum Maximum Units Reverse voltage VR 200 V Power dissipation 25 C lead temperature PD 250 mW Storage temperature TSTG 65 +150 C Operating temperature TA 65 +150 C Electrostatic discharge: ESD Human Body Model (HBM), Class 1C 1000 V Note 1: Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device. CAUTION: Although this device is designed to be as robust as possible, electrostatic discharge (ESD) can damage this device. This device must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times. Table 3. SMP1352 Series Electrical Specifications (Note 1) (T = +25 C, Unless Otherwise Noted) A Parameter Symbol Test Condition Min Typical Max Units Reverse current IR VR = 200 V 10 A Capacitance CT F = 1 MHz, V = 20 V 0.35 pF Resistance RS F = 100 MHz I = 1 mA 11 15 I = 10 mA 2 2.80 I = 100 mA 1 1.35 Forward voltage VF IF = 10 mA 0.8 V Carrier lifetime TI IF = 10 mA 1 s I region width 50 m Note 1: Performance is guaranteed only under the conditions listed in this table. Skyworks Solutions, Inc. Phone 781 376-3000 Fax 781 376-3100 sales skyworksinc.com www.skyworksinc.com 2 May 20, 2015 Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice 200052M