TLP197D TOSHIBA Photocoupler Photorelay TLP197D PC Card Modems Unit: mm PBX Measurement Equipment The Toshiba TLP197D consists of an infrared emitting diode optically coupled to a photo-MOSFET in a SOP package. TLP197D is housed in a compact and thin SOP package and has characteristics of high-withstanding voltage and low ON-state resistance, which enable TLP197D to be applied in hook switches, dial-pulse switches for modems and facsimiles, and switches for test circuit switching in PBXs. 6-pin SOP (2.54SOP6): Height = 2.1 mm, pitch = 2.54 mm Normally open (1-form-A) device Peak OFF-state voltage: 200 V (min) Trigger LED current: 3 mA (max) ON-state current: 200 mA (max) ON-state resistance: 8 (max) Isolation voltage: 1500 Vrms (min) JEDEC UL-recognized: UL 1577, File No.E67349 JEITA cUL-recognized: CSA Component Acceptance Service No.5A File No.E67349 TOSHIBA 11-7C1 Weight: 0.13 g (typ.) Pin Configuration (top view) 1 6 1: Anode 2: Cathode 4: Drain D1 2 5 5: Source 6: Drain D2 3 4 Schematic 1 6 2 5 4 Start of commercial production 2002-02 2019 1 2019-06-17 Toshiba Electronic Devices & Storage Corporation TLP197D Absolute Maximum Ratings (Ta = 25C) Characteristics Symbol Rating Unit Forward current I 50 mA F Forward current derating (Ta25C) I /C 0.5 mA/C F Peak forward current I 1 A FP (100 s pulse, 100 pps) Reverse voltage V 5 V R P 50 mW Diode power dissipation D P /C -0.5 mW/C Diode power dissipation derating (Ta25C) D Junction temperature T 125 C j Off-state output terminal voltage V 200 V OFF A connection 200 On-state current B connection I 200 mA ON C connection 400 A connection 2.0 On-state current derating B connection I /C 2.0 mA/C ON (Ta 25C) C connection 4.0 A connection Output power P 300 mW B connection O dissipation C connection Output power A connection dissipation P /C -3.0 mW /C B connection O derating (Ta 25C) C connection Junction temperature T 125 C j Operating temperature range T 40 to 85 C opr Storage temperature range T 55 to 125 C stg Lead soldering temperature (10 s) T 260 C sol Isolation voltage BVS 1500 Vrms (AC, 60 s, R.H. 60 %) (Note 1) Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (Handling Precautions/Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc.). Note 1: Pins 1, 2 and 3 are shorted together, and pins 4, 5 and 6 are shorted together. Recommended Operating Conditions Characteristics Symbol Min Typ. Max Unit Supply voltage V 160 V DD Forward current I 5 7.5 25 mA F On-state current I 130 mA ON Operating temperature T 20 60 C opr Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the device. Additionally, each item is an independent guideline respectively. In developing designs using this product, please confirm specified characteristics shown in this document. 2019 2 2019-06-17 Toshiba Electronic Devices & Storage Corporation Detector LED