TLP206G TOSHIBA Photocoupler IRED & Photo-MOS FET TLP206G PBX mm Unit: Modem FAX Card Measurement Instrument The TOSHIBA TLP206G consists of an infrared emitting diode optically coupled to a photo-MOS FET in a 8 pin SOP. The TLP206G is a 2-Form-A switch which is suitable for replacement of mechanical relays in many applications. SOP 8 pin (2.54SOP8): 2-Form-A Peak off-state voltage: 350 V (min) Trigger LED current: 3 mA (max) On-state current: 120 mA (max) On-state resistance: 35 (max) Isolation voltage: 1500 Vrms (min) UL-recognized: UL 1577, File No.E67349 TOSHIBA 11-10H1 VDE-approved: EN 60747-5-5 (Note 1) Weight: 0.2 g (typ.) Note 1: When a VDE approved type is needed, please designate the Option(V4). Schematic Pin Configuration (top view) 1 8 2-Form-A 1, 3 6, 8 8 7 6 5 7 2 1 2 3 4 2, 4 5, 7 6 3 4 5 1, 3: Anode 2, 4: Cathpde 5: Drain D1 6: Drain D2 7: Drain D3 8: Drain D4 Start of commercial production 1997-08 2019 1 2019-06-17 Toshiba Electronic Devices & Storage Corporation TLP206G Absolute Maximum Ratings (Ta = 25C) Characteristic Symbol Rating Unit Forward current I 50 mA F Forward current derating (Ta 25C) I / C -0.5 mA / C F Pulse forward current (100s pulse, 100pps) I 1 A FP Reverse voltage V 5 V R P 50 mW Diode power dissipation D Diode power dissipation derating (Ta 25C) P /C -0.5 mW/C D Junction temperature T 125 C j Off-state output terminal voltage V 350 V OFF Both channel 100 On-state current I mA ON One channel 120 Both channel -1.0 On-state RMS current I / C mA / C ON derating(Ta 25C) One channel -1.2 Output power dissipation P 454 mW O Output power dissipation derating (Ta 25C) P / C -4.54 mW / C O Junction temperature T 125 C j Storage temperature range T -55 to 125 C stg Operating temperature range T -40 to 85 C opr Lead soldering temperature (10 s) T 260 C sol Isolation voltage (AC, 60 s, R.H. 60 %) (Note 1) BV 1500 S V rms Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (Handling Precautions/Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Note 1: Device considered a two-terminal device: Pins1, 2, 3 and 4 shorted together and pins 5, 6, 7 and 8 shorted together. Recommended Operating Conditions Characteristic Symbol Min Typ. Max Unit Supply voltage V 280 V DD Forward current I 5 7.5 25 mA F On-state current I 100 mA ON Operating temperature T -20 65 C opr Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the device. Additionally, each item is an independent guideline respectively. In developing designs using this product, please confirm specified characteristics shown in this document. 2019 2 2019-06-17 Toshiba Electronic Devices & Storage Corporation Detector LED