TLP2095 TOSHIBA PHOTOCOUPLER IRED & PHOTO-IC TLP2095 Unit: mm Programmable controllers Microprocessor system interfaces The Toshiba TLP2095 consists of two infrared emitting diodes optically coupled to a high-gain, high-speed photodetector. The TLP2095 is housed in a 6-pin MFSOP. With a totem-pole output, the TLP2095 is capable of both sinking and sourcing current. The TLP2095 has an internal Faraday shield, which provides a guaranteed common-mode transient immunity of 10 kV/ s. The TLP2095 has a noninverting output. An inverting-output version, the TLP2098, is also available. Buffer logic type (totem-pole output) Guaranteed Performance Over Temperature: -40 to 100C Power Supply Voltage: 3.0 to 20 V JEDEC Input Threshold Current: I =3 mA (max) FLH JEITA TOSHIBA 11-4C2 Switching Time (t /t ): 250 ns (max) pLH pHL Weight: 0.09 g (typ.) Common mode transient immunity: 15 kV/ s Isolation Voltage: 3750 Vrms UL-recognized: UL 1577, File No.E67349 cUL-recognized: CSA Component Acceptance Service No.5A Pin Configuration (top view) File No.E67349 1 : Anode VDE-approved : EN 60747-5-5 (Note 1) V 1 CC 6 Cathode Note 1: When a VDE approved type is needed, 3 : Cathode Anode 5 please designate the Option(V4). 4 : GND 5 : Output GND 3 4 6 : V SHIELD CC Truth Table Input LED Tr1 Tr2 Output H ON ON OFF H L OFF OFF ON L Schematic I CC V CC 6 I F1 0.1 F bypass capacitor must be Tr1 connected between pin 6 and 4 1 I O V F V O 3 Tr2 5 I F2 GND Start of commercial production SHIELD 4 2009-05 2019 1 2019-06-03 Toshiba Electronic Devices & Storage Corporation TLP2095 Recommended Operating Conditions CHARACTERISTIC SYMBOL MIN TYP. MAX UNIT Input Current, ON I 5 15 mA F(ON) Input Voltage, OFF V 0 0.8 V F(OFF) Supply Voltage* V 3.0 20 V CC Operating Temperature T -40 100 C opr * This item denotes operating range, not meaning of recommended operating conditions. Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the device. Additionally, each item is an independent guideline respectively. In developing designs using this product, please confirm specified characteristics shown in this document. Absolute Maximum Ratings (Ta = 25C) CHARACTERISTIC SYMBOL RATING UNIT Forward Current I 20 mA F Forward Current Derating (Ta 83 C) I /Ta -0.48 m A / C F Peak Transient Forward Current (Note 1) I 1 A FPT Input Power Dissipation P 40 mW D Input power dissipation derating (Ta 83 C) P /Ta -0.96 mW/C D Output Current 1 (Ta 25 C) I 25/-15 mA O1 Output Current 2 (Ta 100 C) I 5/-5 mA O2 Output Voltage V -0.5 to 20 V O Supply Voltage V -0.5 to 20 V CC Output Power Dissipation P 75 mW O Output Power Dissipation Derating (Ta 25C) P / Ta -0.75 mW/C O Operating Temperature Range T -40 to 100 C opr Storage Temperature Range T -55 to 125 C stg Lead Solder Temperature (10 s) T 260 C sol Isolation Voltage (AC, 60 s, R.H. 60 %) (Note 2) BV 3750 V s rms Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (Handling Precautions/Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc.). Note 1: Pulse width 1 s, 300 pps. Note 2: Device considered a two terminal device: pins 1 and 3 shorted together and pins 4, 5 and 6 shorted together. 2019 2 2019-06-03 Toshiba Electronic Devices & Storage Corporation DETECTOR LED