TLP2098 TOSHIBA PHOTOCOUPLER GaAAs IRED & PHOTO-IC TLP2098 Unit in mm Programmable controllers High-speed digital interfaces Data transmission between circuits with different voltage potential The Toshiba TLP2098 consists of two GaAAs infrared light emitting diode optically coupled to a high-gain, high-speed photodetector. The TLP2098 is housed in a 6-pin MFSOP. The TLP2098 has an internal Faraday shield, which provides a guaranteed common-mode transient immunity of 15 kV/s. The TLP2098 has an inverting output. A non-inverting output version, the TLP2095, is also available. z Inverter logic type (totem-pole output) JEDEC JEITA z Guaranteed Performance over temperature: -40 to 100C TOSHIBA 11-4C2 z Power Supply Voltage: 3.0 to 20 V Weight: 0.09 g (typ.) z Input Threshold Current: I = 3 mA (max) FHL z Switching Time (t /t ): 250 ns (max) pLH pHL z Common mode transient immunity: 15 kV/s Pin Configuration (top view) z Isolation Voltage: 3750 Vrms 1 : Anode V 1 CC 6 Cathode Truth Table 3 : Cathode 5 Anode Input LED Tr1 Tr2 Output 4 : GND H ON OFF ON L GND 5 : Output 4 3 OFF ON OFF H L SHIELD 6 : VCC Schematic I CC V CC 6 I F1 Tr1 1 I O V F V O 3 Tr2 5 I F2 GND SHIELD 4 0.1 F bypass capacitor must be connected between pin 6 and 4 1 2009-09-10 TLP2098 Recommended Operating Conditions CHARACTERISTIC SYMBOLMIN TYP. MAXUNIT Input Current , ON I 5 15 mA F(ON) Input Voltage , OFF V 0 0.8 V F(OFF) Supply Voltage* V 3.0 20 V CC Operating Temperature T -40 100 C opr * This item denotes operating range, not meaning of recommended operating conditions. Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the device. Additionally, each item is an independent guideline respectively. In developing designs using this product, please confirm specified characteristics shown in this document. Absolute Maximum Ratings (Ta = 25C) CHARACTERISTIC SYMBOLRATINGUNIT Forward Current I 20 mA F Forward Current Derating (Ta 83) I / C -0.48 mA/C F Peak Transient Forward Current (Note1) I 1 A FPT Output Current 1 (Ta 25) I 25/-15 mA O1 Output Current 2 (Ta 100) I 5/-5 mA O2 Output Voltage V -0.5 to 20 V O Supply Voltage V -0.5 to 20 V CC Operating Temperature Range T -40 to 100 C opr Storage Temperature Range T -55 to 125 C stg Lead Solder Temperature (10s) T 260 C sol Isolation Voltage (AC,1min.,R.H. 60%,Ta=25C) (Note 2) BV 3750 V s rms Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (Handling Precautions/Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Note 1: Pulse width 1s, 300pps. Note 2: Device considered a two terminal device: pins 1 and 3 shorted together and pins 4, 5 and 6 shorted together. 2 2009-09-10 DETECTOR LED