TLP3240 TOSHIBA Photocoupler PHOTORELAY TLP3240 Measurement Instruments Logic IC Testers / Memory Testers Unit: mm Board Testers / Scanners 4.2 1.4 The TOSHIBA TLP3240 is a super small-outline photorelay, suitable for surface-mount assembly. The TLP3240 consists of an infrared emitting diode optically coupled to a photo-MOS FET and housed in a 4-pin 3.65 1.9 package. Its characteristics also include low OFF-state current and low output pin capacitance, enabling it to be used in high-frequency measuring (0.3) 0.2 3.8 0.2 1.27 instruments. 2.04 (0.46) Features 4 pin SSOP (SSOP4) : 1.8 mm high, 1.27 mm pitch 1-Form-A Enlarged drawing is shown on page 4. Peak off-state voltage : 40 V (min) Trigger LED current : 3 mA (max) JEDEC - On-state current : 120 mA (max) JEITA - On-state resistance : 14 (max), 12 (typ.) TOSHIBA 11-2B1 Weight: 0.03 g (typ.) Output capacitance : 0.8 pF (max), 0.45 pF (typ.) Isolation voltage : 1500 Vrms (min) UL-recognized : UL 1577, File No.E67349 Pin configuration (top view) 1 4 2 3 1 : Anode 2 : Cathode 3 : Drain 4 : Drain Schematic 1 4 2 3 Start of commercial production 2007-08 2019 1 2019-06-24 Toshiba Electronic Devices & Storage Corporation 1.8 0.15 TLP3240 Absolute Maximum Ratings (Ta = 25C) Characteristic Symbol Rating Unit Forward current I 30 mA F Forward current derating (Ta25C) I /C 0.3 mA/C F Reverse voltage V 5 V R Diode power dissipation P 50 mW D P /C -0.5 mW/C Diode power dissipation derating (Ta 25C) D Junction temperature T 125 C j Off-State output terminal voltage V 40 V OFF On-State current I 120 mA ON On-State current derating (Ta25C) I /C 1.2 mA/C ON Output power dissipation P 202 mW O Output power dissipation derating (Ta 25C) P / C 2.02 mW / C O Junction temperature T 125 C j Storage temperature range T 40 to 125 C stg Operating temperature range T 20 to 85 C opr Lead soldering temperature (10 s) T 260 C sol Isolation voltage (AC, 60 s, R.H.60 %) (Note 1) BV 1500 Vrms S Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (Handling Precautions/Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). (Note 1): Device considered a two-terminal device: Pins 1 and 2 shorted together, and pins 3 and 4 shorted together. Precautions This device is sensitive to electrostatic discharge. When using this device, please ensure that all tools and equipment are earthed. Recommended Operating Conditions Characteristic Symbol Min Typ. Max Unit Supply voltage V 32 V DD Forward current I 20 mA F Operating temperature T 25 60 C opr Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the device. Additionally, each item is an independent guideline respectively. In developing designs using this product, please confirm specified characteristics shown in this document. Individual Electrical Characteristics (Ta = 25C) Characteristic Symbol Test Condition Min Typ. Max Unit Forward voltage V I = 5 mA 1.15 1.30 1.45 V F F Reverse current IR VR = 5 V 10 A Capacitance C V = 0 V, f = 1 MHz 30 pF T F Off-state current I V = 35 V 10 200 pA OFF OFF Capacitance C V = 0 V, f = 100 MHz, t < 1 s 0.45 0.8 pF OFF 2019 2 2019-06-24 Toshiba Electronic Devices & Storage Corporation Detector LED Detector LED