TOSHIBA Photocoupler Photorelay TLX9175J Battery Control in Automotive Equipment Unit: mm Fuel Battery Control in Automotive Equipment Application for Electrical Vehicle The Toshiba TLX9175J consists of an infrared LED optically coupled to a photo-MOSFET in a SO6 package. This coupler use high voltage MOSFET between output terminals. It adequate for the applications of Battery Control Systems. Normally open (1-Form-A) device Peak off-state voltage: 600 V (min) Trigger LED current: 3 mA (max) On-state current: 15 mA (max) On-state resistance: 335 (max)( t < 1 s) Isolation voltage: 3750 Vrms (min) AEC-Q101 qualified JEDEC JEITA TOSHIBA 11-4M1S Weight: 0.08 g (typ.) Pin Configuration (top view) 1 6 1: Anode 3: Cathode 4: Drain 6: Drain 3 4 2019 1 2019-06-28 Toshiba Electronic Devices & Storage Corporation Absolute Maximum Rating (Unless otherwise specified, Ta = 25C) (Note) Characteristics Symbol Rating Unit Forward current I 25 mA F Forward current derating (Ta 70 C) I /C -0.18 mA/C F Reverse voltage V 5 V R LED Input Power Dissipation PD 50 mW Input Power Dissipation Derating (Ta 70 C) PD/C -0.61 mW/C Junction temperature T 125 C j Off-state output terminal voltage V 600 V OFF Ta = 25 C 15 mA On-state current Ta = 85 C I 11 mA ON Ta = 105 C 7 mA Ta 60 C -0.16 Forward current derating I /C mA/C ON Ta 85 C -0.2 Detector Ta = 25 C 80 mA On-state current Ta = 85 C I 50 mA ONpk (Peak) (Note 2) Ta = 105 C 25 mA Output power dissipation P 90 mW O Output power dissipation derating (Ta 70 C) P /C -0.9 mW/C O Junction temperature T 125 C j Storage temperature T -55 to 125 C stg Operating temperature T -55 to 105 C opr Lead soldering temperature (10 s) T 260 C sol Isolation voltage (AC, 60 s, R.H. 60%) (Note 1) BV 3750 Vrms S Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (Handling Precautions/Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Note: This product is more sensitive than conventional products to electrostatic discharge (ESD). It is therefore all the more necessary to observe general precautions regarding ESD when handling this component. Note 1: LED pins are shorted together. Detector pins are also shorted together. Note 2: Exponential curve, pulse width < 1ms, f 150Hz Recommended Operating Conditions (Note) Characteristics Symbol Min Typ. Max Unit Supply voltage V 450 V DD Forward current I 10 12 20 mA F On-state current I 10 mA ON Operating temperature T -40 85 C opr Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the device. Additionally, each item is an independent guideline respectively. In developing designs using this product, please confirm specified characteristics shown in this document. 2019 2 2019-06-28 Toshiba Electronic Devices & Storage Corporation