TORX1950A(F) FIBER OPTIC RECEIVING MODULE TORX1950A(F) GENERAL PURPOSE OPTICAL RECEIVING MODULE For JIS F05 type optical connector CMOS level Interface +5V single power supply ATC (Automatic Threshold Control) circuit built-in 1. Absolute Maximum Ratings ( Ta = 25C) Characteristics Symbol Rating Unit Storage Temperature T 40 to 95 C stg Operating Temperature T 40 to 85 C opr Supply Voltage V 0.5 to 6 V CC High Level Output Current I 20 mA OH Low Level Output Current I 20 mA OL Soldering Temperature T 260 (Note 1) C sol Note 1: Soldering time 10 s (More than 1 mm apart from the package). Using continuously heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handboo k(Handling Precautions/ Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). 2. Operating Ranges Characteristics Symbol Min Typ. Max Unit Supply Voltage V 4.75 5.0 5.25 V CC High Level Output Current I - - 2.0 mA OH Low Level Output Current I - - 2.0 mA OL Start of commercial production 2016-01 1 2016-04-18 TORX1950A(F) 3. Electrical and Optical Characteristics (Ta = 25C, Vcc=5V) Characteristics Symbol Test Condition Min Typ. Max Unit Data Rate - NRZ Code (Note 2) DC - 10 Mb/s DC to 10 Mb/s APF (Note3) 0.2 - 50 Using TOTX1950A(F) H-PCF (Note4) 0.2 - 1000 DC to 10 Mb/s Transmission Distance - m Using TOTX1960A(F) H-PCF (Note5) 0.2 - 700 H-PCF (Note4) 0.2 - 1000 DC to 6 Mb/s Using TOTX1960A(F) H-PCF (Note5) 0.2 - 800 Pulse width 100 ns 30 - 30 Pulse cycle 200 ns, C = 10 pF L Pulse Width Distortion ( Note 6) tw ns Pulse width 165 ns 55 - 55 Pulse cycle 330 ns, C = 10 pF L Using APF and TOTX1950A(F), (Note3) 9 - - DC to 10 Mb/s Maximum Receivable Power (Note 7) P dBm MAX Using H-PCF and TOTX1960A(F), (Note4) 14 - - DC to 10 Mb/s Using APF and TOTX1950A(F), (Note3) - - 27 DC to 10 Mb/s Using APF and TOTX1950A(F), (Note3) - - 28 DC to 6 Mb/s Minimum Receivable Power (Note 7) P dBm MIN Using H-PCF and TOTX1960A(F), (Note4) - - 29 DC to 10 Mb/s Using H-PCF and TOTX1960A(F), (Note4) - - 30 DC to 6 Mb/s Current Consumption I - - 9 20 mA CC High Level Output Voltage V V = 4.75V 4.1 4.5 - V OH CC Low Level Output Voltage V V = 4.75V - 0.1 0.4 V OL CC Note 2: High level output when optical flux is received. Low level output when it is not received. The duty factor must be kept 25 to 75%. Note 3: All Plastic fiber (980 m core / 1000 m cladding, NA=0.5) with polished surface. Note 4: H-PCF (200 m core / 230 m cladding). F05 type optical connector with polished surface. Note 5: H-PCF (200m core / 230 m cladding). F05 type optical connector with non-polished surface. (cut by fiber cutter). Note 6: Between input of TOTX1950A(F),TOTX1960A(F) and output of TORX1950A(F). 9 Note 7: BER 10 , Valued by peak. 2 2016-04-18