VESD05A1A-HD1-GS08 Vishay

VESD05A1A-HD1 www.vishay.com Vishay Semiconductors ESD Protection Diode in LLP1006-2L FEATURES Ultra compact LLP1006-2L package Low package height < 0.4 mm 1 2 1-line ESD protection Low leakage current < 1 A 20856 Low load capacitance C = 76 pF D (V = 2.5 V f = 1 MHz) R 20855 ESD immunity acc. IEC 61000-4-2 30 kV contact discharge MARKING (example only) 30 kV air discharge High surge current acc. IEC 61000-4-5 I > 16 A PP XY Soldering can be checked by standard vision inspection. 21121 No X-ray necessary Bar = cathode marking Pin plating NiPdAu (e4) no whisker growth X = date code e4 - precious metal (e.g. Ag, Au, NiPd, NiPdAu) (no Sn) Y = type code (see table below) PATENT(S): www.vishay.com/patents Material categorization: for definitions of compliance click logo to get started DESIGN SUPPORT TOOLS please see www.vishay.com/doc 99912 Models Available ORDERING INFORMATION TAPED UNITS PER REEL DEVICE NAME ORDERING CODE MINIMUM ORDER QUANTITY (8 mm TAPE on 7 REEL) VESD05A1A-HD1 VESD05A1A-HD1-GS08 8000 8000 PACKAGE DATA PACKAGE TYPE MOLDING COMPOUND MOISTURE DEVICE NAME WEIGHT SOLDERING CONDITIONS NAME CODE FLAMMABILITY RATING SENSITIVITY LEVEL MSL level 1 VESD05A1A-HD1 LLP1006-2L H 0.72 mg UL 94 V-0 Peak temperature max. 260 C (according J-STD-020) ABSOLUTE MAXIMUM RATINGS VESD05A1A-HD1 PARAMETER TEST CONDITIONS SYMBOL VALUE UNIT Peak pulse current Acc. IEC 61000-4-5 t = 8/20 s single shot I 16 A P PPM Peak pulse power Acc. IEC 61000-4-5 t = 8/20 s single shot P 192 W P PP Contact discharge acc. IEC 61000-4-2 10 pulses 30 kV ESD immunity V ESD Air discharge acc. IEC 61000-4-2 10 pulses 30 kV Operating temperature Junction temperature T -40 to +125 C J Storage temperature T -55 to +150 C stg PATENT(S): www.vishay.com/patents This Vishay product is protected by one or more United States and international patents. Rev. 2.0, 03-Jan-2019 Document Number: 81800 1 For technical questions, contact: ESDprotection vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 VESD05A1A-HD1 www.vishay.com Vishay Semiconductors ELECTRICAL CHARACTERISTICS VESD05A1A-HD1 (T = 25 C, unless otherwise specified) amb PARAMETER TEST CONDITIONS/REMARKS SYMBOL MIN. TYP. MAX. UNIT Protection paths Number of lines which can be protected N - - 1 lines channel Reverse stand off voltage Max. reverse working voltage V -- 5 V RWM Reverse voltage At I = 1 A V 5- - V R R Reverse current At V = 5 V I - < 0.1 1 A R R Reverse breakdown voltage At I = 1 mA V 66.8 7.5 V R BR At I = 1 A V -7.2 8.5 V PP C Reverse clamping voltage At I = I = 16 A V - 10.5 12 V PP PPM C At I = 1 A V -1 1.5 V PP F Forward clamping voltage At I = I = 16 A V -3.2 4.5 V PP PPM F At V = 0 V f = 1 MHz C - 130 150 pF R D Capacitance At V = 2.5 V f = 1 MHz C -76- pF R D BiAs-MODE (bidirectional asymmetrical protection mode) With the VESD05A1A-HD1 one signal- or data-lines (L1) can be protected against voltage transients. With pin 1 connected to ground and pin 2 connected to a signal- or data-line which has to be protected. As long as the voltage level on the data- or signal-line is between 0 V (ground level) and the specified maximum reverse working voltage (V ) the protection diode RWM between data line and ground offers a high isolation to the ground line. The protection device behaves like an open switch. As soon as any positive transient voltage signal exceeds the break through voltage level of the protection diode, the diode becomes conductive and shorts the transient current to ground. Now the protection device behaves like a closed switch. The clamping voltage (V ) is defined by the breakthrough voltage (V ) level plus the voltage drop at the series impedance C BR (resistance and inductance) of the protection device. Any negative transient signal will be clamped accordingly. The negative transient current is flowing in the forward direction of the protection diode. The low forward voltage (V ) clamps the negative transient close to the ground level. F Due to the different clamping levels in forward and reverse direction the VESD05A1A-HD1 clamping behaviour is bidirectional and asymmetrical (BiAs). L1 BiAs Ground 20925 Rev. 2.0, 03-Jan-2019 Document Number: 81800 2 For technical questions, contact: ESDprotection vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 1 2