VBUS054B-HSF www.vishay.com Vishay Semiconductors 4-Line BUS-Port ESD-Protection FEATURES Ultra compact LLP75-6L package 6 5 4 Low package height < 0.6 mm 4-line USB ESD-protection Low leakage current Low load capacitance C = 0.8 pF D 1 2 3 20397 ESD-protection acc. IEC 61000-4-2 15 kV contact discharge 20453 1 15 kV air discharge e4 - precious metal (e.g. Ag, Au, NiPd, NiPdAu) (no Sn) MARKING (example only) Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 XX YY 21001 Dot = pin 1 marking XX = date code YY = type code (see table below) ORDERING INFORMATION TAPED UNITS PER REEL DEVICE NAME ORDERING CODE MINIMUM ORDER QUANTITY (8 mm TAPE ON 7 REEL) VBUS054B-HSF VBUS054B-HSF-GS08 3000 15 000 PACKAGE DATA PACKAGE TYPE MOLDING COMPOUND MOISTURE SOLDERING DEVICE NAME WEIGHT NAME CODE FLAMMABILITY RATING SENSITIVITY LEVEL CONDITIONS MSL level 1 VBUS054B-HSF LLP75-6L U3 4.2 mg UL 94 V-0 260 C/10 s at terminals (according J-STD-020) ABSOLUTE MAXIMUM RATINGS PARAMETER TEST CONDITIONS SYMBOL VALUE UNIT Pin 1, 3, 4 or 6 to pin 2 I 3A PPM acc. IEC 61000-4-5 t = 8/20 s single shot P Peak pulse current Pin 5 to pin 2 I 10 A PPM acc. IEC 61000-4-5 t = 8/20 s single shot P Pin 1, 3, 4 or 6 to pin 2 P 45 W PP acc. IEC 61000-4-5 t = 8/20 s single shot P Peak pulse power Pin 5 to pin 2 P 200 W PP acc. IEC 61000-4-5 t = 8/20 s single shot P Contact discharge acc. IEC61000-4-2 10 pulses V 15 kV ESD ESD immunity Air discharge acc. IEC61000-4-2 10 pulses V 15 kV ESD Operating temperature Junction temperature T -40 to +125 C J Storage temperature T -55 to +150 C STG Rev. 1.7, 15-Jul-15 Document Number: 81624 1 For technical questions, contact: ESDprotection vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000VBUS054B-HSF www.vishay.com Vishay Semiconductors ELECTRICAL CHARACTERISTICS VBUS054B-HSF PARAMETER TEST CONDITIONS/REMARKS SYMBOL MIN. TYP. MAX. UNIT Protection paths Number of line which can be protected N - - 4 lines channel at I = 0.1 A, R Reverse stand-off voltage V -- 5 V RWM pin 1, 3, 4 or 6 to pin 2 at V = V = 5 V, IN RWM Reverse current I - < 0.01 0.1 A R pin 1, 3, 4 or 6 to pin 2 at I = 1 mA, R V 6.3 7.1 8 V BR pin 5 to pin 2 Reverse breakdown voltage at I = 1 mA, R V 6.9 7.9 8.7 V BR pin 1, 3, 4 or 6 to pin 2 at I = 3 A pin 1, 3, 4 or 6 to pin 2 PP Reverse clamping voltage V -- 15 V C acc. IEC 61000-4-5 at I = 3 A pin 2 to pin 1, 3, 4 or 6 F Forward clamping voltage V -- 5 V F acc. IEC 61000-4-5 Pin 1, 3, 4 or 6 to pin 2 V (at pin 1, 3, 4 or 6) = 0 V and C -0.8 1 pF IN D V (at pin 5) = 5 V f = 1 MHz BUS Capacitance Pin 1, 3, 4 or 6 to pin 2 V (at pin 1, 3, 4 or 6) = 2.5 V and C -0.5 0.8 pF IN D V (at pin 5) = 5 V f = 1 MHz BUS Line symmetry Difference of the line capacitances dC -- 0.05 pF D Supply line capacitance Pin 5 to pin 2 at V = 0 f = 1 MHz C - 110 - pF R ZD Note Ratings at 25 C, ambient temperature unless otherwise specified TYPICAL CHARACTERISTICS (T = 25 C, unless otherwise specified) amb 120 % 100 % 8 s to 100 % Rise time = 0.7 ns to 1 ns 100 % 80 % 80 % 60 % 60 % 20 s to 50 % 53 % 40 % 40 % 27 % 20 % 20 % 0 % 0 % -10 0 10203040 50607080 90100 010 20 30 40 20548 Time (ns) Time (s) 20557 Fig. 1 - ESD Discharge Current Wave Form Fig. 2 - 8/20 s Peak Pulse Current Wave Form acc. IEC 61000-4-2 (330 /150 pF) acc. IEC 61000-4-5 Rev. 1.7, 15-Jul-15 Document Number: 81624 2 For technical questions, contact: ESDprotection vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 Discharge Current I ESD I PPM