VBUS054B-HSF www.vishay.com Vishay Semiconductors 4-Line BUS-Port ESD Protection FEATURES Ultra compact LLP75-6L package 6 5 4 Low package height < 0.6 mm 4-line USB ESD protection Low leakage current 1 2 3 20397 Low load capacitance C = 0.8 pF D ESD immunity acc. IEC 61000-4-2 15 kV contact discharge 20453 1 15 kV air discharge e4 - precious metal (e.g. Ag, Au, NiPd, NiPdAu) MARKING (example only) (no Sn) XX Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 YY 21001 Dot = pin 1 marking XX = date code YY = type code (see table below) click logo to get started DESIGN SUPPORT TOOLS Models Available ORDERING INFORMATION TAPED UNITS PER REEL DEVICE NAME ORDERING CODE MINIMUM ORDER QUANTITY (8 mm TAPE ON 7 REEL) VBUS054B-HSF VBUS054B-HSF-GS08 3000 15 000 PACKAGE DATA PACKAGE TYPE MOLDING COMPOUND MOISTURE DEVICE NAME WEIGHT SOLDERING CONDITIONS NAME CODE FLAMMABILITY RATING SENSITIVITY LEVEL MSL level 1 VBUS054B-HSF LLP75-6L U3 4.2 mg UL 94 V-0 Peak temperature max. 260 C (according J-STD-020) ABSOLUTE MAXIMUM RATINGS PARAMETER TEST CONDITIONS SYMBOL VALUE UNIT Pin 1, 3, 4 or 6 to pin 2 I 3A PPM acc. IEC 61000-4-5 t = 8/20 s single shot P Peak pulse current Pin 5 to pin 2 I 10 A PPM acc. IEC 61000-4-5 t = 8/20 s single shot P Pin 1, 3, 4 or 6 to pin 2 P 45 W PP acc. IEC 61000-4-5 t = 8/20 s single shot P Peak pulse power Pin 5 to pin 2 P 200 W PP acc. IEC 61000-4-5 t = 8/20 s single shot P Contact discharge acc. IEC61000-4-2 10 pulses V 15 kV ESD ESD immunity Air discharge acc. IEC61000-4-2 10 pulses V 15 kV ESD Operating temperature Junction temperature T -40 to +125 C J Storage temperature T -55 to +150 C STG Rev. 1.9, 04-Jan-2019 Document Number: 81624 1 For technical questions, contact: ESDprotection vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 VBUS054B-HSF www.vishay.com Vishay Semiconductors ELECTRICAL CHARACTERISTICS VBUS054B-HSF PARAMETER TEST CONDITIONS/REMARKS SYMBOL MIN. TYP. MAX. UNIT Protection paths Number of line which can be protected N - - 4 lines channel at I = 0.1 A, R Reverse stand-off voltage V -- 5 V RWM pin 1, 3, 4 or 6 to pin 2 at V = V = 5 V, IN RWM Reverse current I - < 0.01 0.1 A R pin 1, 3, 4 or 6 to pin 2 at I = 1 mA, R V 6.3 7.1 8 V BR pin 5 to pin 2 Reverse breakdown voltage at I = 1 mA, R V 6.9 7.9 8.7 V BR pin 1, 3, 4 or 6 to pin 2 at I = 3 A pin 1, 3, 4 or 6 to pin 2 PP Reverse clamping voltage V -- 15 V C acc. IEC 61000-4-5 at I = 3 A pin 2 to pin 1, 3, 4 or 6 F Forward clamping voltage V -- 5 V F acc. IEC 61000-4-5 Pin 1, 3, 4 or 6 to pin 2 V (at pin 1, 3, 4 or 6) = 0 V and C -0.8 1 pF IN D V (at pin 5) = 5 V f = 1 MHz BUS Capacitance Pin 1, 3, 4 or 6 to pin 2 V (at pin 1, 3, 4 or 6) = 2.5 V and C -0.5 0.8 pF IN D V (at pin 5) = 5 V f = 1 MHz BUS Line symmetry Difference of the line capacitances dC -- 0.05 pF D Supply line capacitance Pin 5 to pin 2 at V = 0 f = 1 MHz C - 110 - pF R ZD Note Ratings at 25 C, ambient temperature unless otherwise specified TYPICAL CHARACTERISTICS (T = 25 C, unless otherwise specified) amb 120 % 100 % 8 s to 100 % Rise time = 0.7 ns to 1 ns 100 % 80 % 80 % 60 % 60 % 20 s to 50 % 53 % 40 % 40 % 27 % 20 % 20 % 0 % 0 % -10 0 10203040 50607080 90100 010 20 30 40 20548 Time (ns) Time (s) 20557 Fig. 1 - ESD Discharge Current Wave Form Fig. 2 - 8/20 s Peak Pulse Current Wave Form acc. IEC 61000-4-2 (330 /150 pF) acc. IEC 61000-4-5 Rev. 1.9, 04-Jan-2019 Document Number: 81624 2 For technical questions, contact: ESDprotection vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 Discharge Current I ESD I PPM