2N6782, 2N6784 and 2N6786 Qualified Levels: N-CHANNEL MOSFET JAN, JANTX, and Available on JANTXV commercial Qualified per MIL-PRF-19500/556 versions DESCRIPTION This family of 2N6782, 2N6784 and 2N6786 switching transistors are military qualified up to the JANTXV level for high-reliability applications. These devices are also available in a low profile U-18 LCC surface mount package. Microsemi also offers numerous other transistor products to meet higher and lower power ratings with various switching speed requirements in both through-hole and surface-mount packages. Important: For the latest information, visit our website 2N6782, 2N6784 and 2N6786 Notes: 1. Derate linearly 0.12 W/C for T > +25 C. C 2. The following formula derives the maximum theoretical I limit. I is also limited by package and internal wires and may be limited due to D D pin diameter. 3. I = 4 x I as calculated in note 1. DM D1 MECHANICAL and PACKAGING CASE: Hermetically sealed, kovar base, nickel cap. TERMINALS: Tin/lead solder dip nickel plate or RoHS compliant pure tin plate (commercial grade only). MARKING: Part number, date code, manufacturers ID. WEIGHT: Approximately 1.064 grams. See Package Dimensions on last page. PART NOMENCLATURE JAN 2N6782 (e3) Reliability Level RoHS Compliance JAN = JAN Level e3 = RoHS compliant (available JANTX = JANTX Level on commercial grade only) JANTXV = JANTXV Level Blank = non-RoHS compliant Blank = Commercial JEDEC type number (see Electrical Characteristics table) SYMBOLS & DEFINITIONS Symbol Definition di/dt Rate of change of diode current while in reverse-recovery mode, recorded as maximum value. I Forward current F R Gate drive impedance G V Drain supply voltage DD V Drain source voltage, dc DS V Gate source voltage, dc GS T4-LDS-0064, Rev. 3 (121467) 2012 Microsemi Corporation Page 2 of 9