74ACTQ04SC ON Semiconductor

74ACTQ04 Quiet Series Hex Inverter May 2007 74ACTQ04 tm Quiet Series Hex Inverter Features General Description I reduced by 50% The ACTQ04 contains six inverters and utilizes Fairchild CC Quiet Series technology to guarantee quiet output Guaranteed simultaneous switching noise level and switching and improved dynamic threshold performance. dynamic threshold performance FACT Quiet Series features GTO output control and Improved latch-up immunity undershoot corrector in addition to a split ground bus for Outputs source/sink 24mA superior ACMOS performance. Has TTL-compatible inputs Ordering Information Order Package Number Number Package Description 74ACTQ04SC M14A 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150 Narrow 74ACTQ04SJ M14D 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide 74ACTQ04MTC MTC14 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Device also available in Tape and Reel. Specify by appending suffix letter X to the ordering number. Pb-Free package per JEDEC J-STD-020B. Connection Diagram Logic Symbol IEEE/IEC Pin Description Pin Names Description A Inputs n O Outputs n FACT, FACT Quiet Series, and GTO are trademarks of Fairchild Semiconductor Corporation. 1990 Fairchild Semiconductor Corporation www.fairchildsemi.com 74ACTQ04 Rev. 1.474ACTQ04 Quiet Series Hex Inverter Absolute Maximum Ratings Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Symbol Parameter Rating V Supply Voltage 0.5V to +7.0V CC DC Input Diode Current I IK V 20mA = 0.5V I = V + 0.5V +20mA V I CC V DC Input Voltage 0.5V to V + 0.5V I CC I DC Output Diode Current OK = 0.5V 20mA V O V = V + 0.5V +20mA O CC V DC Output Voltage 0.5V to V + 0.5V O CC DC Output Source or Sink Current 50mA I O I or I DC V or Ground Current per Output Pin 50mA CC GND CC T Storage Temperature 65C to +150C STG DC Latch-Up Source or Sink Current 300mA T Junction Temperature 140C J Recommended Operating Conditions The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not recommend exceeding them or designing to absolute maximum ratings. Symbol Parameter Rating V Supply Voltage 4.5V to 5.5V CC V Input Voltage 0V to V I CC V Output Voltage 0V to V O CC T Operating Temperature 40C to +85C A 125mV/ns V / t Minimum Input Edge Rate: from 0.8V to 2.0V, V 4.5V, 5.5V V IN CC 1990 Fairchild Semiconductor Corporation www.fairchildsemi.com 74ACTQ04 Rev. 1.4 2