ESD8018 ESD Protection Diode Low Capacitance Array for High Speed Data Lines The ESD8018 surge protection is specifically designed to protect www.onsemi.com four high speed data points from ESD. Ultralow capacitance and low ESD clamping voltage make this device an ideal solution for MARKING protecting voltage sensitive high speed data lines. The flowthrough DIAGRAM style package allows for easy PCB layout and matched trace lengths necessary to maintain consistent impedance between high speed AAM UDFN10 differential lines. CASE 517CY Features AA = Specific Device Code Low Capacitance (0.32 pF Max, I/O to GND) M = Date Code = PbFree Package Protection for the Following IEC Standards: (Note: Microdot may be in either location) IEC 6100042 (Level 4) IEC 6100045 (Lightning) 5A (8/20 s) PIN CONFIGURATION Low ESD Clamping Voltage I/O I/O I/O I/O These Devices are PbFree, Halogen Free/BFR Free and are RoHS 10 9 8 7 Compliant Typical Applications VbyOne HS 12 3 4 5 6 LVDS I/O GND I/O I/O GND I/O USB 3.1 Type C 10 GbE ORDERING INFORMATION Device Package Shipping MAXIMUM RATINGS (T = 25C unless otherwise noted) J ESD8018MUTAG UDFN10 3000 / Tape & Reel Rating Symbol Value Unit (PbFree) Operating Junction Temperature Range T 55 to +125 C J For information on tape and reel specifications, Storage Temperature Range T 55 to +150 C stg including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specification Lead Solder Temperature T 260 C L Brochure, BRD8011/D. Maximum (10 Seconds) IEC 6100042 Contact (ESD) ESD 17 kV IEC 6100042 Air (ESD) ESD 17 kV Maximum Peak Pulse Current I 5.0 A PP 8/20 s T = 25C (I/OGND) A Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. See Application Note AND8308/D for further description of survivability specs. Semiconductor Components Industries, LLC, 2015 1 Publication Order Number: July, 2019 Rev. 3 ESD8018/DESD8018 I/O I/O I/O I/O I/O I/O I/O I/O Pin 1 Pin 3 Pin 4 Pin 6 Pin 7 Pin 8 Pin 9 Pin 10 Pin 2 Note: Common GND Only Minimum of 1 GND connection required Figure 1. Pin Schematic www.onsemi.com 2 =