ESDONCAN1, SESDONCAN1 CAN/CAN-FD Bus Protector Low Capacitance ESD Protection Diode for CAN/CANFD Bus The S/ESDONCAN1 has been designed to protect the CAN transceiver from ESD and other harmful transient voltage events. This www.onsemi.com device provides bidirectional protection for each data line with a single compact SOT23 package, giving the system designer a low cost option for improving system reliability and meeting stringent SOT23 EMI requirements. DUAL BIDIRECTIONAL VOLTAGE SUPPRESSOR Features 200 W PEAK POWER 200 W Peak Power Dissipation per Line (8 x 20 sec Waveform) Diode Capacitance Matching Low Reverse Leakage Current (< 100 nA) Low Capacitance HighSpeed FlexRay Data Rates SOT23 IEC Compatibility: IEC 6100042 (ESD): Level 4 CASE 318 IEC 6100044 (EFT): 50 A 5/50 ns STYLE 27 IEC 6100045 (Lighting) 3.0 A (8/20 s) ISO 76371, Nonrepetitive EMI Surge Pulse 2, 8.0 A PIN 1 (1 x 50 s) PIN 3 ISO 76373, Repetitive Electrical Fast Transient (EFT) PIN 2 EMI Surge Pulses, 50 A (5 x 50 ns) Flammability Rating UL 94 V0 MARKING DIAGRAM S Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements AECQ101 Qualified and PPAP Capable 25EM These are PbFree Devices Typical Applications 1 Industrial Smart Distribution Systems (SDS) 25E = Device Code DeviceNet M = Date Code = PbFree Package Automotive (Note: Microdot may be in either location) Controlled Area Network CAN 2.1 / CAN FD Low and High Speed CAN ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 2 of this data sheet. Semiconductor Components Industries, LLC, 2013 1 Publication Order Number: October, 2017 Rev. 2 ESDONCAN1/DESDONCAN1, SESDONCAN1 MAXIMUM RATINGS (T = 25C, unless otherwise specified) J Symbol Rating Value Unit PPK Peak Power Dissipation, 8 x 20 s Double Exponential Waveform (Note 1) 200 W T Operating Junction Temperature Range 55 to 150 C J T Storage Temperature Range 55 to 150 C J T Lead Solder Temperature (10 s) 260 C L ESD Human Body Model (HBM) 8.0 kV Machine Model (MM) 400 V IEC 6100042 Specification (Contact) 23 kV Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. 1. Nonrepetitive current pulse per Figure 1. ELECTRICAL CHARACTERISTICS (T = 25C, unless otherwise specified) J Symbol Parameter Test Conditions Min Typ Max Unit V Reverse Working Voltage (Note 2) 24 V RWM V Breakdown Voltage I = 1 mA (Note 3) 26.2 32 V BR T I Reverse Leakage Current V = 24 V 15 100 nA R RWM V Clamping Voltage I = 1 A (8 x 20 s Waveform) 33.4 36.6 V C PP (Note 4) V Clamping Voltage I = 3 A (8 x 20 s Waveform) 44 50 V C PP (Note 4) I Maximum Peak Pulse Current 8 x 20 s Waveform (Note 4) 3.0 A PP C Capacitance V = 0 V, f = 1 MHz (Line to GND) 10 pF J R C Diode Capacitance Matching V = 0 V, 5 MHz (Note 5) 0.26 2 % R Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. 2. Surge protection devices are normally selected according to the working peak reverse voltage (V ), which should be equal or greater RWM than the DC or continuous peak operating voltage level. 3. V is measured at pulse test current I . BR T 4. Pulse waveform per Figure 1. 5. C is the percentage difference between C of lines 1 and 2 measured according to the test conditions given in the electrical characteristics J table. ORDERING INFORMATION Device Package Shipping ESDONCAN1LT1G SOT23 3,000 / Tape & Reel (PbFree) SESDONCAN1LT1G* SOT23 3,000 / Tape & Reel (PbFree) ESDONCAN1LT3G SOT23 10,000 / Tape & Reel (PbFree) SESDONCAN1LT3G* SOT23 10,000 / Tape & Reel (PbFree) For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. *S Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements AEC Q101 Qualified and PPAP Capable. www.onsemi.com 2