Thyristors Datasheet MAC16HCDG, MAC16HCMG, MAC16HCNG TRIAC 400V - 800V RoHS Pb Description Designed primarily for full-wave ac control applications, such as motor controls, heating controls or dimmers or wherever full wave, silicon gatecontrolled devices are needed. Features High Commutating di/dt and High Surge Cur rent Capability High Immunity to dv/dt 150 Amperes 125C Industr y St andard TO220 Uniform Gate Trigger Currents Package for Ease of Design in Three Quadrants, Q1, Q2, Glass P assivated Junctions and Q3 for Reliability and Uniformity Bloc king Voltage to 800 Volts These Devices are PbFree OnState Current Rating of and are RoHS Compliant 16 Amperes RMS at 80C Additional Information Functional Diagram Resources Accessories Samples Pin Out CASE 221A STYLE 4 1 2 2021 Littelfuse, Inc. 1 Specifications are subject to change without notice. Revised: TK. 09/30/21Thyristors Datasheet MAC16HCDG, MAC16HCMG, MAC16HCNG TRIAC 400V - 800V Maximum Ratings (TJ = 25C unless otherwise noted) Rating Symbol Value Unit MAC16HCD 400 Peak Repetitive OffState Voltage (Note 1) V , DRM MAC16HCM 600 V ( 40 to 125C, Sine Wave, 50 to 60 Hz, Gate Open) V RRM MAC16HCN 800 On-State RMS Current (Full Cycle Sine Wave, 60 Hz, T = 80C) I 16 A C T (RMS) Peak Non-Repetitive Surge Current I 150 A TSM (One Full Cycle Sine Wave, 60 Hz, T = 125C) C 2 Circuit Fusing Consideration (t = 8.3 ms) I t 93 Asec Peak Gate Power (T = 80C, Pulse Width 1.0 s) P 20 W C GM Average Gate Power (t = 8.3 ms, T = 80C) P 0.5 W C G(AV) Operating Junction Temperature Range T -40 to +125 C J Storage Temperature Range T -40 to +150 C stg Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 1. V and V for all types can be applied on a continuous basis. Ratings apply for zero or negative gate voltage however, positive gate voltage shall not be applied concurrent with negative potential on the anode. Blocking voltages DRM RRM shall not be tested with a constant current source such that the voltage ratings of the devices are exceeded. Thermal Characteristics Rating Symbol Value Unit JunctiontoCase (AC) R 2.2 JC Thermal Resistance, C/W JunctiontoAmbient R 62.5 JA Maximum Lead Temperature for Soldering Purposes, 1/8 from case for T 260 C L 10 seconds Electrical Characteristics - OFF (TJ = 25C unless otherwise noted Electricals apply in both directions) Characteristic Symbol Min Typ Max Unit - - 0.01 Peak Repetitive Blocking Current T = 25C I , J DRM mA (V = V = V Gate Open) T = 125C I - - 2.0 D DRM RRM J RRM Electrical Characteristics - ON (TJ = 25C unless otherwise noted Electricals apply in both directions) Characteristic Symbol Min Typ Max Unit Peak OnState Voltage (Note 2) (I = 21 A Peak) V 1.6 V TM TM MT2(+), G(+) 10 16 50 Gate Trigger Current (Continuous dc) MT2(+), G() I 10 18 50 mA GT (V = 12 V, R = 100 ) D L MT2(), G() 10 22 50 MT2(+), G(+) 0.5 0.8 1.5 Gate Trigger Voltage (Continuous dc) MT2(+), G() V 0.5 0.73 1.5 V GT (V = 12 V, R = 100 ) D L MT2(), G() 0.5 0.82 1.5 MT2(+), G(+) 33 60 Latching Current MT2(+), G() V 36 80 V GD (V = 24 V, I = 50 mA) D G MT2(), G() 33 50 Holding Current (V = 12 V , Gate Open, Initiating Current = 150 mA)) I 20 50 mA D dc H Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. 2. Indicates Pulse Test: Pulse Width 2.0 ms, Duty Cycle 2%. 2021 Littelfuse, Inc. 2 Specifications are subject to change without notice. Revised: TK. 09/30/21