TGP2109-SM 8 - 12 GHz 6-Bit Digital Phase Shifter Product Description Qorvos TGP2109-SM is a packaged 6-bit digital phase shifter fabricated on Qorvos high performance 0.15m GaAs pHEMT process. It operates over 8 to 12 GHz and provides 360 of phase coverage with a LSB of 5.625. It also achieves a low RMS phase error of 4 with 6 dB of insertion loss. The TGP2109-SM was developed for simple system QFN 4x4 mm 16L integration. It uses positive only switch logic eliminating the need for a negative voltage rail. In addition, both ports are matched to 50 ohms with DC blocking capacitors. Ease of use along with low insertion loss and a high degree of resolution makes the TGP2109-SM Functional Block Diagram ideally suited for a variety of x-band phased array applications including commercial and military radars and phase array communication systems. The device is lead-free and RoHS compliant. Product Features Frequency Range: 8 to 12 GHz 6-Bit Digital Phase Shifter Bi-Directional 360 Coverage, LSB = 5.625 RMS Phase Error: 4 RMS Amplitude Error: 0.5 dB Insertion Loss: 6 dB Return Loss: 10 dB IRL 15 dB ORL Applications Input P1dB: 29 dBm X-Band Radar Input IP3: >40 dBm Satellite Communication Systems IM3: <-50 dBc Control Voltage: VL: 0V to +0.2V, VH: +3V to +5V QFN Package Dimensions: 4.0 x 4.0 x 1.64 mm Performance is typical across frequency. Please reference electrical specification table and data plots Ordering Information for more details. Part No. Description TGP2109-SM 8-12 GHz 6-Bit Digital Phase Shifter TGP2109-SM EVB TGP2109-SM Evaluation Board - 1 of 16 - Data Sheet Rev. D. May 31, 2019 Subject to change without notice www.qorvo.com TGP2109-SM 8 - 12 GHz 6-Bit Digital Phase Shifter Absolute Maximum Ratings Recommended Operating Conditions Parameter Value Parameter Value Control Voltage VH +3 V to + 5 V Control and Reference Voltage 6 V Control Voltage VL 0 V to + 0.2 V Control Current 0.5 mA Control Current (Total) < 100 A Power Dissipation 1.5 W Temperature Range -40 to +85 C Input Power, CW, 50 , 85C 33 dBm Electrical specifications are measured at specified test Channel Temperature 200 C conditions. Specifications are not guaranteed overall operating conditions. Mounting Temperature (30 Seconds) 260 C Storage Temperature -55 to 150 C Operation of this device outside the parameter ranges given above may cause permanent damage. These are stress ratings only, and functional operation of the device at these conditions is not implied. Extended application of Absolute Maximum Rating conditions may reduce device reliability. Electrical Specifications Test conditions unless otherwise noted: 25C. Control Voltage: VL = 0 V, VH = +5 V, see Bias Truth Table. Parameter Min Typical Max Units Operational Frequency Range 8 12 GHz Insertion Loss 6 dB Input Return Loss 10 dB Output Return Loss 15 dB RMS Phase Error 4 deg RMS Amplitude Error 0.5 dB Input P1dB 29 dBm Input IP3 (Tone Spacing = 10 MHz, Pin/Tone = 16 dBm) > 40 dBm IM3 (Tone Spacing = 10 MHz, Pin/Tone = 16 dBm) < -50 dBc Insertion Loss Temperature Coefficient 0.004 dB/C Bias Truth Table Logic 0 = VL, value from 0 to +0.2 V Logic 1 = VH = VREF, value from +3 V to +5 V B1 B6 VREF Phase Shifter B2 B3 B4 B5 0 (Reference) 0 0 1 1 1 1 1 5 1 0 1 1 1 1 1 11 0 1 1 1 1 1 1 22 0 0 0 1 1 1 1 45 0 0 1 0 1 1 1 90 0 0 1 1 0 1 1 180 0 0 1 1 1 0 1 355 1 1 0 0 0 0 1 - 2 of 16 - Data Sheet Rev. D. May 31, 2019 Subject to change without notice www.qorvo.com