TGP2615 15 -19 GHz 6-Bit Digital Phase Shifter (+Vc) Product Description Qorvos TGP2615 is a 6-bit digital phase shifter fabricated on Qorvos high-performance 0.15-m GaAs pHEMT process. It operates over 15 to 19 GHz and provides 360 of phase coverage with an LSB of 5.625. It also achieves a low RMS phase error of 4, with 8 dB average insertion loss over all states. The TGP2615 uses positive switch logic, eliminating the need for a negative voltage rail. This combined with low insertion loss and a high degree of resolution makes the TGP2615 ideally suited for phased-array radar and satellite communications applications. Block Diagram Product Features 6-Bit Digital Phase Shifter Frequency Range: 15 to 19 GHz 10 11 12 360 Coverage, LSB = 5.625 RMS Phase Error: 4 REF REF REF REF REF REF RMS Amplitude Error: 1 dB 9 1 Insertion Loss: 7 dB +22 +45 +90 +180 +11 +5 Input Return Loss: >10 dB Output Return Loss: >9 dB 8 7 6 5 4 3 2 Input IP3: >34 dBm Input P1dB: >24 dBm Control Voltage: 0/+3.3 V Chip Dimensions: 2.11 x 1.47 x 0.10 mm Performance is typical across frequency. Please reference electrical specification table and data plots for more details Applications Ordering Information Phased Array Rada Part No. Description TGP2615 15-19 GHz 6-Bit Phase Satellite Communications TGP2615 Shifter, Waffle Pack, Qty 100 TGP2615 EVB TGP2615 Evaluation Board - 1 of 9 - Data Sheet Rev. B. Feb 3, 2021 Subject to change without notice www.qorvo.com TGP2615 15 -19 GHz 6-Bit Digital Phase Shifter (+Vc) Absolute Maximum Ratings Recommended Operating Conditions Parameter Value Parameter Value Control Voltage (5 , 11 , 22 , 45 , 90 , 180 ) 0/+3.3 V Control and Reference Voltages 6 V Reference Voltage (VREF) +3.3 V Control Current 1 mA Current (IREF, ICTRL) 10 A Power Dissipation 0.8 W Temperature Range -40 to 85 C Input Power, CW, 50 , 85C 30 dBm Electrical specifications are measured at specified test Channel Temperature 200 C conditions. Specifications are not guaranteed overall operating conditions. Mounting Temperature (30 Seconds) 320 C Storage Temperature -55 to 150 C Operation of this device outside the parameter ranges given above may cause permanent damage. These are stress ratings only, and functional operation of the device at these conditions is not implied. Extended application of Absolute Maximum Rating conditions may reduce device reliability. Electrical Specifications 0 0 0 0 0 0 Test conditions unless otherwise noted: 25C. Control Voltage (REF, 5 , 11 , 22 , 45 , 90 , 180 ) = 0/+3.3 V See Bias Truth Table. Parameter Conditions Min Typical Max Units Operational Frequency Range 15 19 GHz Insertion Loss Average across all phase states 6 - 8 dB Input Return Loss Average across all phase states >10 dB Output Return Loss Average across all phase states >9 dB RMS Phase Error 4 deg RMS Amplitude Error 1 dB Input P1dB >24 dBm Tone spacing = 10 MHz Input IP3 >34 dBm Pin/Tone = 15 dBm Insertion Loss Temperature Coefficient Average all phase states, 19 GHz 0.002 dB/C Bias and Truth Table Control voltage Logic 0 = +0 to +0.2 V Logic 1 = +3.3 to +5 V 0 0 0 0 0 0 Phase Shift 5 11 22 45 90 180 REF 0 (Reference) 0 0 0 0 0 0 1 5 1 0 0 0 0 0 1 11 0 1 0 0 0 0 1 22 0 0 1 0 0 0 1 45 0 0 0 1 0 0 1 90 0 0 0 0 1 0 1 180 0 0 0 0 0 1 1 355 1 1 1 1 1 1 1 - 2 of 9 - Data Sheet Rev. B. Feb 3, 2021 Subject to change without notice www.qorvo.com