TGP2105-SM 6 - 18 GHz 6-Bit Digital Phase Shifter (+Vc) Product Description The Qorvo TGP2105-SM is a packaged 6-bit digital phase shifter fabricated on Qorvos high performance 0.15 um GaAs pHEMT process. It operates over 6 to 18 GHz while providing 360 of phase coverage with a LSB of 5.625. It also achieves a low RMS phase error of 4 with 8 dB of insertion loss over all states. The TGP2105-SM uses positive switch logic, eliminating the need for a negative voltage rail. That, along with low insertion and a high degree of resolution makes the TGP2105-SM ideally suited for a variety of wideband phased array applications, including commercial and Air Cavity Ceramic QFN 5x5 mm 32L military radars, satellite-based communication systems and electronic warfare. The device is lead-free and RoHS compliant. Functional Block Diagram 30 28 Product Features 7 18 22 45 180 11 5 90 RF Out RF In Frequency Range: 6 to 18 GHz 6-Bit Digital Phase Shifter 360 Coverage, LSB = 5.625 10 11 12 13 15 RMS Phase Error: 4 RMS Amplitude Error: 0.45 dB Insertion Loss: <10 dB Return Loss: >12 dB Input P1dB: >25 dBm Applications Input IP3: >41 dBm Phased Array Antenna Systems Control Voltage: 0/+5V Satellite Communication Systems QFN Package Dimensions: 5.0 x 5.0 x 1.45 mm Electronic Warfare Performance is typical across frequency. Please reference electrical specification table and data plots for more details. Ordering Information Part No. Description 6-18 GHz 6-Bit Digital Phase TGP2105-SM Shifter TGP2105-SMEVB01 TGP2105-SM Evaluation Board - 1 of 11 - Data Sheet Rev. B. Dec 6, 2017 Subject to change without notice www.qorvo.com TGP2105-SM 6 - 18 GHz 6-Bit Digital Phase Shifter (+Vc) Absolute Maximum Ratings Recommended Operating Conditions Parameter Value Parameter Value 0 0 0 0 0 Control Voltage (5 , 11 , 22 , 45 , 90 , Control and Reference Voltage 6 V 0/+5 V 0 180 , REF) Control Current -15 to +5 mA Operating Temperature Range -40 C to +85 C Power Dissipation 0.9 W Electrical specifications are measured at specified test Input Power, CW, 50 , 85C 30 dBm conditions. Specifications are not guaranteed overall operating conditions. Channel Temperature 200 C Mounting Temperature (30 Seconds) 260 C Storage Temperature -55 to 150 C Operation of this device outside the parameter ranges given above may cause permanent damage. These are stress ratings only, and functional operation of the device at these conditions is not implied. Extended application of Absolute Maximum Rating conditions may reduce device reliability. Electrical Specifications Test conditions unless otherwise noted: 25 C. Control Voltage (REF, 5, 11, 22, 45, 90, 180) = 0/+5 V See Bias Truth Table. Parameter Conditions Min Typical Max Units Operational Frequency Range 6 18 GHz Insertion Loss 6 - 10 dB Input Return Loss >12 dB Output Return Loss >12 dB RMS Phase Error 4 deg RMS Amplitude Error 0.45 dB Input P1dB > 25 dBm Tone Spacing = 10 MHz, Input IP3 > 41 dBm Pin/Tone = 15 dBm Insertion Loss Temperature Coefficient 0.008 dB/C Bias Truth Table Logic 0 = 0 V, Logic 1 = +5 V Voltage for Logic 1 of VCTRL (5, 11, 22, 45, 90, 180) must be the same with VREF 0 0 0 0 0 0 Phase Shifter 5 11 22 45 90 180 REF 0 (Reference) 0 0 0 0 0 0 1 5 1 0 0 0 0 0 1 11 0 1 0 0 0 0 1 22 0 0 1 0 0 0 1 45 0 0 0 1 0 0 1 90 0 0 0 0 1 0 1 180 0 0 0 0 0 1 1 355 1 1 1 1 1 1 1 - 2 of 11 - Data Sheet Rev. B. Dec 6, 2017 Subject to change without notice www.qorvo.com