TGP2107 6 to 18 GHz 6-Bit Digital Phase Shifter (-V ) c Applications Phased Array Antenna Systems Satellite Communication Systems Electronic Warfare Product Features Functional Block Diagram Frequency Range: 6 to 18 GHz 2 3 4 5 6 7 8 9 10 6-Bit Digital Phase Shifter 360 Coverage, LSB = 5.625 RMS Phase Error: 5 RMS Amplitude Error: 0.55 dB 1 11 90 5 11 180 45 22 Insertion Loss: <10 dB RF In RF Out Return Loss: >12 dB Input P1dB: >25 dBm Input IP3: >41 dBm 15 14 13 12 Control Voltage: 5/0 V Chip Dimensions: 3.15 x 3.15 x 0.10 mm General Description Pad Configuration TriQuints TGP2107 is a 6-bit, digital phase shifter Pad No. Symbol fabricated on TriQuints high performance 0.15m GaAs 1 RF In pHEMT process. It operates over 6 to 18 GHz and 2 90Bit provides 360 of phase coverage with a LSB of 3, 15 5N Bit 5.625. It also achieves a low RMS phase error of 5 4, 14 5P Bit with 8 dB of insertion loss over all states. 5, 13 11N Bit The TGP2107 uses negative switch logic, eliminating the 6, 12 11P Bit need for a reference voltage. That, along with low 7 180P Bit insertion and a high degree of resolution makes the 8 180N Bit TGP2107 ideally suited for a variety of wideband phased 9 45 Bit array applications, including commercial and military 10 22 Bit radars, satellite-based communication systems and 11 RF Out electronic warfare. The device is lead-free and RoHS compliant. Ordering Information Part ECCN Description 6-Bit Digital Phase Shifter TGP2107 EAR99 (-V ) c Preliminary Datasheet: Rev A 10-30-13 Disclaimer: Subject to change without notice - 1 of 10 - 2013 TriQuint www.triquint.com TGP2107 6 to 18 GHz 6-Bit Digital Phase Shifter (-V ) c Absolute Maximum Ratings Recommended Operating Conditions Parameter Value Parameter Value Control Voltage 6 V Control Votage 5/0 V (5N, 5P, 11N, 11P, 22, 45, 90, 180N, 180P) Control Current 15 to +5 mA Power Dissipation 0.9 W Electrical specifications are measured at specified test conditions. Specifications are not guaranteed over all Input Power, CW, 50 , 85C 30 dBm recommended operating conditions. Channel tremperature 200C Mounting Temperature 320C (30 Seconds) Storage Temperature 55 to 150C Operation of this device outside the parameter ranges given above may cause permanent damage. These are stress ratings only, and functional operation of the device at these conditions is not implied. Electrical Specifications Test conditions unless otherwise noted: 25C. Control Voltage (5N, 5P, 11N, 11P, 22, 45, 90, 180N, 180P) = 5/0 V See Bias Truth Table. Parameter Conditions Min Typical Max Units Operational Frequency Range 6 18 GHz Insertion Loss 6 - 10 dB Input Return Loss >12 dB Output Return Loss >12 dB RMS Phase Error 5 deg RFM Amplitude Error 0.55 dB Input P1dB >25 dBm Tone spacing = 10 MHz Input IP3 >41 dBm Pin/Tone = 15 dBm Insertion Loss Temperature Coefficient 0.008 dB/C Bias Truth Table Logic 0 = 5 V, Logic 1 = 0 V Phase Shifter 5P 5N 11P 11N 22 45 90 180P 180N 0 (Reference) 0 1 0 1 0 0 0 0 1 5 1 0 0 1 0 0 0 0 1 11 0 1 1 0 0 0 0 0 1 1 22 0 0 1 1 0 0 0 1 1 45 0 0 1 0 1 0 0 1 1 90 0 0 1 0 0 1 0 1 1 180 0 0 1 0 0 0 1 0 355 1 0 1 0 1 1 1 1 0 Preliminary Datasheet: Rev A 10-30-13 Disclaimer: Subject to change without notice - 2 of 10 - 2013 TriQuint www.triquint.com