Rail mounted LXA - X1X analog isolator Galvanic separation input/output/supply. 3 years warranty Signal conversion between input and output. High reliability and accuracy. Detachable, fast and reliable wire connectors. Slim, rail and fast click mounted housing. Single or dual independent channels. Special versions on request. The LXA-X1X isolator is dedicated for separation the analog input signal from the output line. A device assures full 3 ways galvanic separation between input, output and supply lines. User may to choose one of factory preset current (0...5 mA, 0...20 mA, 4...20 mA) or voltage (0...10V). For 4...20mA input it is possible to supply the input current loop. Two independent channels allow for space saving in the control cabinet. There is possibility to deliver device for non-standard signals on demand. 24VDC 17,5 120 Order LXA-X1X using the following code: Channel 2 Channel 1 LXA-1 -1 Input signal Code Code Output signal 0 0...20mA 0...20mA 0 4...20mA (2W) 1 2 4...20mA 4...20mA 2 3 0...5mA 0...5mA 3 4 0...10V 0...10V 4 S On request On request S Notes : 1. Single channel version - specify only channel 1, eg. LXA - 212. 2. Order code for channel 2 specify like for channel 1. AUTOMATION AND INDUSTRIAL ELECTRONIC Input input span (factory preseted) 0...5mA, 0...20mA, 4...20mA, 0...10V, 4...20mA with current loop supply input resistance - current input 100 - voltage input 500k input current loop supply 18...22V DC / 20...0mA overload 200% input span Output output signal (factory preseted) 0...20mA, 4...20mA, 0...10V load resistance - current output 500 - voltage output 1k load variation influeance 0.05% Dane oglne basic accuracy 0.15% response time (10..90%) 0,2 s galvanic separation (test) 1,5 kVAC, 50Hz, 1 min warm up time 15 min Power supply supply voltage - nominal 24 VDC - supply voltage range 20...30 VDC supply current 90mA supply voltage variation influence 0.05% Temperature operating temperature 0...70C temperature influence 0.01%/C Environment conditions storage temperature -20...85C humidity (non-condensing) 90% working position vertical Housing material molded PC/ABS protection housing/terminals IP20/IP20 2 wire connections plugs with screw terminals 1.5 mm dimensions see drowings on the first page weight (single / dual channel) ~110g/160 g AUTOMATION AND INDUSTRIAL ELECTRONIC