EMIF07-LCD02F3 STMicroelectronics

EMIF07-LCD02F3 7-line IPAD, EMI filter and ESD protection for LCD and cameras Features EMI symmetrical (I/O) low-pass filter High efficiency in EMI filtering Lead-free package Very low PCB space occupation: 1.94 mm x 1.54 mm Flip Chip (18 bumps) Very thin package: 0.65 mm High efficiency in ESD suppression High reliability offered by monolithic integration Figure 1. Pin layout (bump side) High reduction of parasitic elements through 5 4 3 2 1 integration and wafer level packaging GND O1 O2 I1 I2 A Complies with the following standards O3 GND B I3 IEC 61000-4-2 level 4 on inputs and outputs: 15 kV (air discharge) O4 O5 GND I5 I4 C 8 kV (contact discharge) MIL STD 883G - Method 3015-7 Class 3 GND I7 O6 O7 I6 D Applications Figure 2. Device configuration Where EMI filtering in ESD sensitive equipment is required: Low-pass Filter LCD for mobile phones Input Output Computers and printers Communication systems MCU boards Ri/o = 70 Cline = 30 pF GND GND GND Description The EMIF07-LCD02F3 is a 7-line highly integrated device designed to suppress EMI/RFI noise in all systems subjected to electromagnetic interference. The EMIF07 Flip Chip package means the package size is equal to the die size. This filter includes ESD protection circuitry, which prevents damage to the protected device when subjected to ESD surges up 15 kV. TM: IPAD is a trademark of STMicroelectronics. February 2010 Doc ID 11639 Rev 3 1/8 www.st.com 8Characteristics EMIF07-LCD02F3 1 Characteristics Table 1. Absolute maximum ratings (T = 25 C) amb Symbol Parameter and test conditions Value Unit T Maximum junction temperature 125 C j T Operating temperature range -40 to +85 C op T Storage temperature range -55 to 150 C stg Table 2. Electrical characteristics (T = 25 C) amb Symbol Parameters I V Breakdown voltage BR IF I Leakage current V RM RM V Stand-off voltage RM V F VCL VBR VRM V V Clamping voltage IRM CL I R I Peak pulse current PP I R Series resistance between input and output PP I/O C Input capacitance per line line Symbol Test conditions Min Typ Max Unit V I = 1 mA 6 8 10 V BR R I V = 3 V 50 200 nA RM RM R Tolerance 20% 70 2 C Vline = 0 V, V = 30 mV, F =1 MHz 30 pF line OSC 2/8 Doc ID 11639 Rev 3