Product is End of Life 12/2014 Si9200 Vishay Siliconix CAN Bus Driver and Receiver DESCRIPTION FEATURES Survives Ground Shorts and Transients on The Si9200EY is designed to interface between the Intel Multiplexed Bus in Automotive and Industrial Applications 82526 CAN controller and the physical bus to provide drive Single Power Supply capability to the bus and differential receive capability to the Compatible with Intel 82526 CAN Controller controller. It is designed to absorb typical electrical Direct Interface - No External Components Required transients on the bus which may occur in an automotive or industrial application, and protect itself against any abnormal Automotive Temperature Range (- 40 C to 125 C) bus conditions. The transmitter will be disabled during these conditions and will be re-enabled when the abnormal condition is cleared. The Si9200EY is built using the Siliconix BiC/DMOS process. This process supports CMOS, DMOS, and isolated bipolar transistors and uses an epitaxial layer to prevent latchup. The bus line pins are diode protected and can be driven beyond the V to ground range. DD The Si9200EY is offered in the space efficient 8-pin high- density surface-mount plastic package and is specified over the automotive temperature range (- 40 C to 125 C). The Si9200EY is available in lead free. PIN CONFIGURATION AND FUNCTIONAL BLOCK DIAGRAM V DD SO-8 TX GND 1 8 GND CAN H 2 7 CAN H RX V CAN L 3 6 DD RX REF 4 5 REF Top View CAN L Bus TX Ordering Information: Si9200EY-T1 Si9200EY-T1E3 (Lead Free) GND Document Number: 70015 www.vishay.com S11-0975-Rev. D, 16-May-11 1 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000Si9200 Vishay Siliconix a ABSOLUTE MAXIMUM RATINGS Parameter Limit Unit Operating Temperature (T ) - 40 to 125 A C Junction and Storage Temperature - 55 to 150 Voltage On Any Pin (except CAN H and CAN L) with Respect to Ground - 0.3 to V + 0.3 DD Voltage On CAN H and CAN L with Respect to Ground - 3 to 16 V Supply Voltage, V - 0.3 to 12 DD Continuous Output Current 100 mA b 62.5 (no airflow) C Thermal Ratings : R thJA Notes: a. Extended exposure to the absolute maximum ratings or stresses beyond these ratings may affect device reliability or may cause permanent damage to the device. Functional operation at conditions other than the recommended operating conditions is not implied. 2 b. Mounted on 1-IN , FR4 PC Board. RECOMMENDED OPERATING RANGE Parameter Limit Unit V 4.75 to 5.25 V DD Bus Load Resistance 60 SPECIFICATIONS Test Conditions Unless Otherwise Specified Limits T = - 40 V to 125 C A V = 4.75 V to 5.25 V Parameter Symbol DD b c b Min. Typ. Max. Unit Input V TX Input Voltage High 4 INH V TX Input Voltage Low V 1 INL I TX Input Current Low TX = 0 V - 50 - 2 IL A I TX = V TX Input Current High - 1 1 IH DD Output V V 22.5 3 CAN HR, CAN LR TX = V , R = Bus Recessive V = INH L DIF - 0.5 0 0.05 V - V CAN HR CAN LR V 2.75 3.5 4.5 CAN HD V 0.5 1.5 2.25 CAN LD Bus Dominant TX = V , R = 60 INL L V = DIF 1.5 2 3 V - V CAN HD CAN LD V - 25 A I 25 A 0.5 V - 0.2 0.5 V 0.5 V + 0.2 V Reference Output REF REF DD DD DD TX = V I = - 10 A V - 0.3 V - 0.05 DD DD INH OUT Receive Output - 2 V , V 7 CAN H CAN L V I = - 100 A V - 1 V - 0.2 (Bus Recessive RXH OUT DD DD - 1 V - V CAN H CAN L Conditions) 0.5 (Bus Recessive) I = - 2 mA V - 1.75 V - 1 DD DD OUT TX = V I = 10 A 0.05 0.3 INH OUT - 0.8 V 7 Receive Output CAN H I = 100 A 0.2 1 OUT V (Bus Dominant - 2 V 5.8 RXL CAN L Conditions) 0.9 V - V 5 CAN H CAN L I = 2 mA 11.75 OUT ( Bus Dominant) R , BUS L 550 IN Internal Resistance R , BUS H 550 k IN from Bus Pins R TX = V (Recessive) 10 100 DIFF INH C IN Internal Capacitance (CAN H, 50 pF c from Bus Pins CAN L) www.vishay.com Document Number: 70015 2 S11-0975-Rev. D, 16-May-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000