KIT-CRD-3DD12P Buck-Boost Evaluation Kit KIT-CRD-3DD12P KIT-CRD-3DD12P Application Note CPWR-AN27, Rev. A Cree Power Applications Cree, Inc. 4600 Silicon Drive 4600 4600 Durham, NC 27703 USA Durham, NC 27703 USA Durham, NC 27703 USA This document is prepared as an application note to install and operate Cree evaluation hardware. CPWR-AN27, Rev A, 04-2019 Copyright 2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo, and Zero Recovery are registered trademarks of Cree, IncAll parts of this application note are provided in English, and the Cautions are provided in English, Mandarin, and Japanese. If the end user of this board is not fluent in any of these languages, it is your responsibility to ensure that they understand the terms and conditions described in this document, including without limitation the hazards of and safe operating conditions for this board. Note: This Cree-designed evaluation hardware for Cree components is a fragile, high voltage, high temperature power electronics system that is meant to be used as an evaluation tool in a lab setting and to be handled and operated by highly qualified technicians or engineers. When this hardware is not in use, it should be stored in an area that has a storage temperature ranging from -40 Celsius to 150 Celsius and if this hardware is transported, special care should be taken during transportation to avoid damaging the board or its fragile components and the board should be transported carefully in an electrostatic discharge (ESD) bag to avoid any damage to electronic components. The hardware does not contain any hazardous substances, is not designed to meet any industrial, technical, or safety standards or classifications, and is not a production qualified assembly. - 40oC 150oC ESD -40 150 ESD CPWR-AN27, Rev A, 04-2019 Copyright 2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo, and Zero Recovery are registered trademarks of Cree, Inc