4-CHANNEL RADIO TRANSMITTER RNP-01 MANUAL INSTRUCTION ZAMEL Sp. z o.o. ul. Zielona 27, 43-200 Pszczyna, Poland tel. +48 (32) 210 46 65, fax +48 (32) 210 80 04 www.zamelcet.com, e-mail: marketing zamel.pl TECHNICAL DATA DESCRIPTION Radio transmitter RNP-01 realises RNP-01 remote control function of devices. Input (supply) terminals: L, N It is mounted in a junction box and under Input rated voltage: 230 V AC the existing switch (monostable push- Input voltage tolerance: -15 +10 % buttons). This solution is very useful and Nominal frequency: 50 / 60 Hz results in easy installation of EXTA FREE Nominal power consumption: 0,22 W system without interference in existing Release terminals: IN1, IN2, IN3, IN4 wiring system. There is a possibility of us- Number of channels: 4 ing electroinstallation equipment of any Transmission: radio 868,32 MHz manufacturer (no design limit). Transmission way: unidirectional Coding: addressing transmission Range: up to 200 m in the open area Optic signalling of transmission: LED red diode FEATURES o Ambient temperature range: -10 +55 C radio transmitter mounted in 60 mm Number of terminal clamps: 6 junction box, 2 Section of connecting cables: up to 2,5 mm remote control of EXTA FREE system Operating position: free receivers, Casing mounting: installation cable box 60 mm possibility of connection to a traditional household switch, Casing protection degree: IP20 (EN 60529) low power consumption, adapted to Protection level: II constant operation, Overvoltage category: II possibility of independent control of four receivers, Pollution degree: 2 wide range of operation (up to 200 m), Surge voltage: 1 kV (EN 61000-4-5) possibility of simultaneous switching Dimensions: 47,5 x 47,5 x 20 mm on/switching off any number of EXTA Weight: 0,031 kg FREE system receivers, possibility of increasing operation ran- Reference standard: ETSI EN 300 220-1, ETSI EN 300 220-2, ge by means of RTN-01 retransmitter. EN 60950, EN 61000 APPEARANCE The device is designed for single-phase installation and must be installed in accordance Release terminals (IN1, IN2, IN3, IN4) with standards valid in a particu- lar country. The device should be connected according to the CAUTION details included in this operat- ing manual. Installation, connection and control should be carried out by a qualified electrician Input (supply) terminals (L, N) staff, who act in accordance with the service manual and the device functions. Disassembling of the device is equal with a loss of guarantee and can cause electric shock. Before installation make sure the connection cables are not under voltage. The cruciform head screwdriver 3,5 mm should be used to instal the device. Improper transport, Optic signalling of receivers operation storage, and use of the device influence its wrong functioning. It is not advisable to instal the device in the following cases: if any device part is miss- ing or the device is damaged or deformed. In case of improper functioning of the device contact the producer. The symbol means selective collecting of electrical and electronic equipment. It is forbidden to put the used equipment together with other waste. VER. 003 20.05.2011CONNECTION MOUNTING, CONNECTION 1. Disconnect power supply by the phase fuse, the circuit- breaker or the switch-disconnector combined to the proper circuit. 2. Check if there is no voltage on connection cables by means of a special measure equipment. 3. Connect the cables with terminals in accordance with the installing diagram. 4. Install RNP-01 device in installation cable box. 5. Switch on the power supply from the mains. The device is ready to operate after correct mount- ing and connection. Releasing the system by a mon- ostable push-button connected to one of four release terminals (IN1-IN4) causes the RNP-01 device to send a radio control signal added to this input (channel). LED red diode signals the transmission is on. Device programming procedure (adding a transmitter to re- ceivers memory) is described in manual instructions of particular EXTA FREE receivers. APPLICATION 4-channel radio transmitter RNP-01 controls operation of radio flush dimmer RDP-01 (switch on/switch or light bright- ening/dimming) or remote control socket RWG-01 (switch on/switch off). The re- ceivers can be controlled by 8-channel P-256/8 remote control. RNP-01 device can be mounted under the existing light- ing switch (required power supply: 230V AC L and N wires). The ZAMEL company devices which are characterised with this sign can cooperate with each other. COOPERATION AND OPERATING RANGE Symbol: ROP-01 ROP-02 ROB-01 SRP-02 SRP-03 RWG-01 RWL-01 ROM-01 ROM-10 RDP-01 RTN-01 RNK-02 180 m 200 m 200 m 200 m 200 m 250 m 180 m 250 m 250 m 180 m 250 m RNK-04 180 m 200 m 200 m 200 m 200 m 250 m 180 m 250 m 250 m 180 m 250 m P-256/8 230 m 250 m 250 m 250 m 250 m 300 m 200 m 300 m 300 m 230 m 300 m P-257/4 (2) 180 m 200 m 200 m 200 m 200 m 250 m 180 m 250 m 250 m 180 m 250 m RNM-10 230 m 250 m 250 m 250 m 250 m 300 m 200 m 300 m 300 m 230 m 300 m RNP-01 160 m 180 m 180 m 180 m 180 m 200 m 160 m 200 m 200 m 160 m 200 m RNP-02 160 m 180 m 180 m 180 m 180 m 200 m 160 m 200 m 200 m 160 m 200 m RNL-01 160 m 180 m 180 m lack* lack* 200 m 160 m 200 m 200 m 160 m 200 m RTN-01 200 m 200 m 200 m 200 m 200 m 250 m 200 m 250 m 250 m 200 m 250 m RCR-01 160 m 180 m 180 m lack* lack* 200 m 160 m 200 m 200 m 160 m 200 m RTI-01 160 m 180 m 180 m 180 m 180 m 200 m 160 m 200 m 200 m 160 m 200 m RXM-01 230 m 250 m 250 m 250 m 250 m 300 m 200 m 300 m 300 m 230 m 300 m *- 1-channel transmitters do not cooperate with roller blind controllers. CAUTION: The given range concerns open area - an ideal condition without any natural or artificial obstacles. If there are some obstacles between a transmitter and a receiver, it is advisable to decrease the range according to: wood and plaster - from 5 to 20, bricks - from 10 to 40 %, reinforced concrete - from 40 to 80 %, metal - from 90 to 100%, glass - from 10 to 20 %. Over- and underground medium and high electrical power lines, radio and television transmitters, GSM transmitters set close to a device system have also a negative influence on the range. WARRANTY CARD There is 24 months guarantee on the product 1. ZAMEL provides a two-year warranty for its products. 2. The ZAMEL warranty does not cover: a) mechanical defects resulting from transport, loading / unloading or other circumstances b) defects resulting from incorrect installation or operation of ZAMEL products c) defects resulting from any changes made by CUS- TOMERS or third parties, to products sold or equipment necessary for the correct operation of products sold d) defects resulting from force majeure or other aleatory events for which ZAMEL is not liable e) power supply (batteries) to be equipped with a device in the moment of sale (if they appear) 3. All complaints in relation to the warranty must be provided by the CUSTOMER in writing to the retailer after discovering a defect. 4. ZAMEL will review complaints in accordance with existing regulations. 5. The way a complaint is settled, e.g. replacement of the product, repair or refund, is left to the discretion of ZAMEL. 6. Guarantee does not exclude, does not limit, nor does it suspend the rights of the PURCHASER resulting from the discrepancy between the goods and the contract. Salesman stamp and signature, date of sale VER. 003 20.05.2011