BUK7Y3R0-40HX Nexperia

BUK7Y3R0-40H N-channel 40 V, 3.0 m standard level MOSFET in LFPAK56 14 September 2017 Product data sheet 1. General description Automotive qualified N-channel MOSFET using the latest Trench 9 low ohmic superjunction technology, housed in a robust LFPAK56 package. This product has been fully designed and qualified to meet AEC-Q101 requirements delivering high performance and endurance. 2. Features and benefits Fully automotive qualified to AEC-Q101: 175 C rating suitable for thermally demanding environments Trench 9 Superjunction technology: Reduced cell pitch enables enhanced power density and efficiency with lower R in DSon same footprint Improved SOA and avalanche capability compared to standard TrenchMOS Tight V limits enable easy paralleling of MOSFETs GS(th) LFPAK Gull Wing leads: High Board Level Reliability absorbing mechanical stress during thermal cycling, unlike traditional QFN packages Visual (AOI) soldering inspection, no need for expensive x-ray equipment Easy solder wetting for good mechanical solder joint LFPAK copper clip technology: Improved reliability, with reduced R and R th DSon Increases maximum current capability and improved current spreading 3. Applications 12 V automotive systems Motors, lamps and solenoid control Start-Stop micro-hybrid applications Transmission control Ultra high performance power switchingNexperia BUK7Y3R0-40H N-channel 40 V, 3.0 m standard level MOSFET in LFPAK56 4. Quick reference data Table 1. Quick reference data Symbol Parameter Conditions Min Typ Max Unit V drain-source voltage 25 C T 175 C - - 40 V DS j I drain current V = 10 V T = 25 C - - 120 A D GS mb P total power dissipation T = 25 C Fig. 1 - - 172 W tot mb Static characteristics R drain-source on-state V = 10 V I = 25 A T = 25 C 1.8 2.55 3 m DSon GS D j resistance Fig. 10 Dynamic characteristics Q gate-drain charge I = 25 A V = 32 V V = 10 V - 6.3 15.8 nC GD D DS GS Fig. 12 Fig. 13 Source-drain diode Q recovered charge I = 25 A dI /dt = -100 A/s V = 0 V - 19.5 - nC r S S GS V = 20 V DS S softness factor I = 25 A dI /dt = -100 A/s V = 0 V - 0.8 - S S GS V = 20 V T = 25 C Fig. 16 DS j BUK7Y3R0-40H All information provided in this document is subject to legal disclaimers. Nexperia B.V. 2017. All rights reserved Product data sheet 14 September 2017 2 / 13