BGU7063 Analog controlled high linearity low noise variable gain amplifier Rev. 2 7 December 2012 Product data sheet 1. Product profile 1.1 General description The BGU7063 is a fully integrated analog-controlled variable gain amplifier module. Its low noise and high linearity performance makes it ideal for sensitive receivers in cellular base station applications. The BGU7063 is operating in the 1920 MHz to 1980 MHz frequency range and has a gain control range of 35 dB. At maximum gain the noise figure is 0.9 dB. The gain is analog-controlled having maximum gain at 0 V and minimum gain at 3.3 V. The LNA can be bypassed extending the dynamic range. The BGU7063 is internally matched to 50 ohm, meaning no external matching is required, enabling ease of use. It is housed in a 16 pins 8 mm 8 mm 1.3 mm leadless HLQFN16R package SOT1301. 1.2 Features and benefits Input and output internally matched to 50 Low noise figure of 0.9 dB High input IP3 of 0.9 dBm High P of 12.5 dBm i(1dB) Bypass mode of LNA giving high dynamic gain range Gain control range of 0 dB to 35 dB Single 5 V supply Single analog gain control of 0 V to 3.3 V Unconditionally stable up to 12.75 GHz Moisture sensitivity level 3 ESD protection at all pins 1.3 Applications Cellular base stations, remote radio heads 3G, LTE infrastructure Low noise applications with variable gain and high linearity requirements Active antennaBGU7063 NXP Semiconductors Analog controlled high linearity low noise variable gain amplifier 1.4 Quick reference data Table 1. Quick reference data V = 5 V V = 5 V f = 1950 MHz T =25 C input and output 50 unless otherwise specified. CC1 CC2 amb Symbol Parameter Conditions Min Typ Max Unit 1 I total supply current high gain mode 200 230 265 mA CC(tot) 2 low gain mode 165 190 215 mA 1 NF noise figure V = 0 V (maximum power gain) -0.9 - dB ctrl(Gp) 1 G = 35 dB -1.05 1.2 dB p 1 IP3 input third-order intercept point G = 35 dB 2-tone tone-spacing = 1.0 MHz 00.9 - dBm I p 1 P input power at 1 dB gain compression G = 35 dB 14 12.5 - dBm i(1dB) p 1 high gain mode: GS1 = LOW GS2 = HIGH (see Table 9) 2 low gain mode: GS1 = HIGH GS2 = LOW (see Table 9) 2. Pinning information 2.1 Pinning )* + & ( Fig 1. Pin configuration 2.2 Pin description Table 2. Pin description Symbol Pin Description RF IN 1 RF input GND 2, 11, 13, 16 ground GS1 3 gain switch control 1 n.c. 4, 5, 7, 10 not connected, internally open BGU7063 All information provided in this document is subject to legal disclaimers. NXP B.V. 2012. All rights reserved. Product data sheet Rev. 2 7 December 2012 2 of 16 ,, & ,, %