QPA2609DEVB1 Qorvo

QPA2609D 7 14 GHz Low Noise Amplifier Product Overview Qorvos QPA2609D is a high-performance, low noise MMIC amplifier fabricated on Qorvos production 90 nm pHEMT process (QPHT09). Covering 7 14 GHz, the QPA2609D provides 27 dB small signal gain and 1.1 dB noise figure. With a compact size of 2.37 x 0.97 mm, the amplifier can deliver 20dBm of saturated power with P1dB of 18 dBm. In addition, the device can provide low IMD3 level of 50 dBc at Pout = 0 dBm/tone. The QPA2609D is matched to 50 ohms with integrated DC blocking caps on both I/O ports for easy handling and simple system integration. The high performance of the QPA2609D makes it ideal for satellite and point to point communication systems. Functional Block Diagram Key Features Frequency Range: 7 14 GHz Noise Figure: 1.1 dB (typical) Small Signal Gain: 27 dB (typical) P1dB: 18 dBm (typical) IMD3: 50 dBc (typical) (Pout=0 dBm/tone) Bias: VD = 3.5 V, IDQ = 120 mA, VG = 0.46 V (typical) Die Dimensions: 2.37 x 0.97 x 0.10 mm Ordering Information Part No. Description Applications QPA2609D 7 14 GHz Low Noise Amplifier Satellite Communications QPA2609S Space Inspected Version, Contact Sales Point-to-Point Communications QPA2609DEVB1 QPA2609D Evaluation Board Radar Data Sheet Rev. C, Feb 2021 Subject to change without notice 1 of 16 www.qorvo.com QPA2609D 7 14 GHz Low Noise Amplifier Absolute Maximum Ratings Parameter Rating Units Drain Voltage (VD) 4.5 V Drain Current (I /I /I ) 96/115/192 mA D1 D2 D3 Gate Voltage Range (VG) 1.3 to 0 V Gate Current (IG1/IG2/IG3 at 125 C) 5.0/5.0/6.6 mA RF Input Power (50 , 85 C) 20 dBm Channel Temperature, TCH 175 C Mounting Temperature (30 seconds) 260 C Storage Temperature 55 to 150 C Exceeding any one or a combination of the Absolute Maximum Rating conditions may cause permanent damage to the device. Extended application of Absolute Maximum Rating conditions to the device may reduce device reliability. Recommended Operating Conditions Parameter Value Units Drain Voltage 3.5 V Drain Current (quiescent, IDQ) 120 mA Drain Current (ID, Low noise / PSAT) 120 / 175 mA Gate Voltage (typical) 0.46 V Operating Temperature Range 40 to 85 C Electrical specifications are measured at specified test conditions. Specifications are not guaranteed over all recommended operating conditions. Electrical Specifications Test conditions unless otherwise noted: VD = +3.5V, IDQ = 120 mA, Temp. = +25C. Data de-embedded to MMIC bond wires. Parameter Min Typ Max Units Operating Frequency 7 14 GHz Small Signal Gain 27 dB Noise Figure 1.1 dB 1-dB Compression Point 18 dBm Input Return Loss 14.0 dB Output Return Loss 13.0 dB RD 3 Order Intermodulation Level (P = 0 dBm / Tone) 50 dBc OUT Output TOI (Pout = 0 dBm / tone) 25.0 dBm Gain (S21) Temperature Coefficient 0.013 dB/C Data Sheet Rev. C, Feb 2021 Subject to change without notice 2 of 16 www.qorvo.com