RFPD3580 Qorvo

RFMD + TriQuint = Qorvo RFPD3580 RFPD3580 GaAs/GaN Power Doubler Hybrid 45MHz to 1218MHz The RFPD3580 is a Hybrid Power Doubler amplifier module. The Package: SOT-115J part employs GaAs pHEMT die and GaN HEMT die and operates from 45MHz to 1218MHz. It provides extremely high output up to 76.8dBmV composite power or 67dBmV virtual level. DC current as well as supply voltage of the device can be externally adjusted for Features optimum distortion performance versus power consumption over a Extremely High Output Capability wide range of output level. Excellent Linearity Superior Return Loss Performance Current setting V+ Optimal Reliability Unconditionally Stable Under All Terminations INPUT OUTPUT 22.5dB Min. Gain at 1218MHz 550mA Max. Devices works at V+ between 24V and 34V Applications 45MHz to 1218MHz CATV Amplifier Systems Functional Block Diagram DOCSIS 3.1 Compliant Ordering Information RFPD3580 Box with 50 pieces Revision DS20160304 - 1 of 8 - Disclaimer: Subject to change without notice 2016RF Micro Devices, Inc. www.rfmd.com / www.qorvo.com RFPD3580 RFMD + TriQuint = Qorvo Absolute Maximum Ratings Caution ESD sensitive device. Parameter Rating Unit RF Input Voltage (single tone) 75 dBmV DC Supply Over-Voltage (5 minutes) 38 V RoHS status based on EU Directive Storage Temperature -40 to +100 C 2011/65/EU . Operating Mounting Base Temperature -30 to +100 C Exceeding any one or a combination of the Absolute Maximum Rating conditions may cause permanent damage to the device. Extended application of Absolute Maximum Rating conditions to the device may reduce device reliability. Specified typical performance or functional operation of the device under Absolute Maximum Rating conditions is not implied. Electrical Specifications Specification Parameter Unit Condition Min Typ Max General Performance. Test conditions unless otherwise noted: V+ = 34V TMB = 35C ZS = ZL = 75 Operating Frequency Range 45 1218 MHz Power Gain 21.8 dB f = 45MHz 22.5 23.0 24.0 dB f = 1218MHz Slope 1 0.5 1.0 2.0 dB f = 45MHz to 1218MHz Flatness of Frequency Response 0.8 dB f = 45MHz to 1218MHz Input Return Loss -20 dB f = 45MHz to 320MHz -19 dB f = 320MHz to 640MHz dB -17 f = 640MHz to 870MHz -16 dB f = 870MHz to 1000MHz -15 dB f = 1000MHz to 1218MHz Output Return Loss -20 dB f = 45MHz to 320MHz -19 dB f = 320MHz to 640MHz -18 dB f = 640MHz to 870MHz -17 dB f = 870MHz to 1000MHz dB -16 f = 1000MHz to 1218MHz Noise Figure 3.0 4.0 dB f = 50MHz to 1218MHz Total Current Consumption (DC) 530.0 550.0 mA Revision DS20160304 - 2 of 8 - Disclaimer: Subject to change without notice 2016 RF Micro Devices, Inc. www.rfmd.com / www.qorvo.com