STGIPN3H60AT STMicroelectronics

STGIPN3H60AT SLLIMM-nano small low-loss intelligent molded module IPM, 3 A, 600 V, 3-phase IGBT inverter bridge Datasheet - production data Applications 3-phase inverters for motor drives Dish washers, refrigerator compressors, heating systems, air-conditioning fans, draining and recirculation pumps Description This intelligent power module implements a compact, high performance AC motor drive in a simple, rugged design. It is composed of six IGBTs with freewheeling diodes and three half- bridge HVICs for gate driving, providing low electromagnetic interference (EMI) characteristics with optimized switching speed. The package is optimized for thermal performance and Features compactness in built-in motor applications, or IPM 3 A, 600 V, 3-phase IGBT inverter other low power applications where assembly bridge including control ICs for gate driving space is limited. This IPM includes an operational and freewheeling diodes amplifier, completely uncommitted, and a Optimized for low electromagnetic comparator that can be used to design a fast and interference efficient protection circuit. SLLIMM is a VCE(sat) negative temperature coefficient trademark of STMicroelectronics. 3.3 V, 5 V, 15 V CMOS/TTL inputs comparators with hysteresis and pull-down resistors Undervoltage lockout Internal bootstrap diode Interlocking function Optimized pinout for easy board layout 85 k NTC for temperature control (UL1434 CA 2 and 4) Table 1: Device summary Order code Marking Package Packing STGIPN3H60AT GIPN3H60AT NDIP-26L Tube September 2016 DocID026945 Rev 2 1/19 www.st.com This is information on a product in full production. Contents STGIPN3H60AT Contents 1 Internal schematic diagram and pin configuration ....................... 3 2 Electrical ratings ............................................................................. 6 2.1 Absolute maximum ratings ................................................................ 6 2.2 Thermal data ..................................................................................... 6 3 Electrical characteristics ................................................................ 7 3.1 Inverter part ....................................................................................... 7 3.2 Control part ....................................................................................... 9 3.2.1 NTC thermistor ................................................................................. 10 4 Application circuit example .......................................................... 12 4.1 Guidelines ....................................................................................... 13 5 Package information ..................................................................... 14 5.1 NDIP-26L type C package information ............................................ 15 5.2 NDIP-26L packing information ........................................................ 17 6 Revision history ............................................................................ 18 2/19 DocID026945 Rev 2