TLP206A TOSHIBA Photocoupler IRED & Photo-MOSFET TLP206A Measurement Instrument Unit: mm Data Acquisition The TOSHIBA TLP206A consists of an infrared emitting diode optically coupled to a photo-MOSFET in an 8-pin SOP. The TLP206A is a 2-form-A switch which is suitable for replacement of mechanical relays in many applications which require space savings. SOP 8 pin (2.54SOP8): 2-form-A Peak off-state voltage: 60 V (min) Trigger LED current: 3 mA (max) On-state current: 400 mA (max) On-state resistance: 2 (max) Isolation voltage: 1500 Vrms (min) UL-recognized: UL 1577, File No.E67349 TOSHIBA 11-10H1 Weight: 0.2 g (typ.) Pin Configuration (top view) 2-form A 1 8 8 7 6 5 2 7 1 2 3 4 3 6 4 5 1, 3: Anode 2, 4: Cathode 5: Drain 1 6: Drain 2 7: Drain 3 8: Drain 4 Internal Circuit 1, 3 6, 8 2, 4 5, 7 Start of commercial production 1997-10 2019 1 2019-06-17 Toshiba Electronic Devices & Storage Corporation TLP206A Absolute Maximum Ratings (Ta = 25C) Characteristics Symbol Rating Unit Forward current I 50 mA F Forward current derating I /C -0.5 mA/C F (Ta 25C) Pulse forward current I 1 A FP (100 s pulse, 100 pps) LED Reverse voltage V 5 V R Diode power dissipation P 50 mW D P /C -0.5 mW/C Diode power dissipation derating D (Ta 25C) Junction temperature T 125 C j Off-state output terminal voltage V 60 V OFF On-state current I 400 mA ON On-state RMS current derating I /C -4.0 mA/C ON (Ta 25C) Detector Output power dissipation P 180 mW O Output power dissipation derating P / C -1.8 mW / C O (Ta 25C) Junction temperature T 125 C j Storage temperature range T -55 to 125 C stg Operating temperature range T -40 to 85 C opr Lead soldering temperature (10 s) T 260 C sol Isolation voltage (AC, 60 s, R.H. 60 %) BV 1500 Vrms S (Note 1) Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (Handling Precautions/Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Note 1: Device considered a two-terminal device: pins 1, 2, 3 and 4 shorted together and pins 5, 6, 7 and 8 shorted together. Recommended Operating Conditions Characteristics Symbol Min Typ. Max Unit Supply voltage V 48 V DD Forward current IF 5 7.5 25 mA On-state current I 400 mA ON Operating temperature T -20 65 C opr Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the device. Additionally, each item is an independent guideline respectively. In developing designs using this product, please confirm specified characteristics shown in this document. 2019 2 2019-06-17 Toshiba Electronic Devices & Storage Corporation