S10040240P CATV Push Pull Hybrid 1000MHz 24dB Product Description S10040240P The S10040240P is a Hybrid Push Pull amplifier module. The part employs GaAs/GaN die and is operated from 40 MHz to 1000 MHz. It provides excellent linearity and superior return loss performance with low noise and optimal reliability. Package: SOT-115J Product Features Excellent Linearity Superior Return Loss Performance Functional Block Diagram Extremely Low Distortion V+ Optimal Reliability Extremely Low Noise Unconditionally Stable Under all Terminations INPUT OUTPUT 24.0 dB Min Gain at 1000 MHz 255 mA Max. at 24 VDC Applications 40 1000 MHz CATV Amplifier Systems Ordering Information Part No. Description S10040240P Box with 50 pcs Data Sheet Rev. E, November 2, 2017 Subject to change without notice 1 of 4 www.qorvo.com S10040240P S10040240P Absolute Maximum Ratings Parameter Value /Range RF Input Voltage (single tone) 75 dBmV DC Supply over-voltage (5 minutes) +30 V Storage Temperature 40 to 100C Operating Mounting Base Temperature 30 to 100C Operation of this device outside the parameter ranges given above may cause permanent damage. Electrical Specifications Test Conditions: V+=24V, T =30C, Z =Z =75 Parameter MB S L Min Typ Max Unit Operational Frequency Range 40 1000 MHz Gain fo = 50 MHz 22.5 23.0 23.5 Gain f = 1000 MHz 24.0 25.5 o dB 1 Gain Slope 40 to 1000 MHz 1.0 2.5 Gain Flatness 40 to 1000 MHz 0.5 fo= 40 to 160 MHz 20.0 Input Return Loss dB fo= 160 to 1000 MHz 18.0 f = 40 to 160 MHz 20.0 o Output Return Loss fo= 160 to 870 MHz 18.0 dB f = 870 to 1000 MHz 15.0 o Noise Figure fo= 50 to 1000 MHz 2.5 3.5 dB mA IDC 250 255 dBc CTB -66 -64 132 analog channels, NTSC frequency raster: dBc XMOD 55.25 MHz to 865.25 MHz, -59 -57 2 dBc +40dBmV flat output level. CSO -66 -64 1. The slope is defined as the difference between the gain at the start frequency and the gain at the stop frequency. 2. CompositeTripleBeat(CTB)TheCTBparameterisdefinedbyANSI/SCTE6. CompositeSecondOrder(CSO)TheCSOparameter(bothsumanddifferenceproducts)isdefinedbyANSI/SCTE6. CrossModulation(XMOD)Crossmodulation(XMOD)isdefinedbyANSI/SCTE58,measuredatbaseband(selectivevoltmetermethod),referencedto 100%modulationofthecarrierbeingtested. Data Sheet Rev. E, November 2, 2017 Subject to change without notice 2 of 4 www.qorvo.com