TQP9107 Qorvo

TQP9107 600 960 MHz 2-stage Power Amplifier General Description The TQP9107 is a high-efficiency two-stage power amplifier in a low-cost surface-mount package. The amplifier is able to achieve 31% power added efficiency at +27dBm output power while operating with a low 84 mA idle current. The amplifier is designed to ensure that all odd- order IMD products are below 17dBm at all output power levels below +24 dBm/tone. The TQP9107 integrates two high performance amplifier 3.5x4.5 mm Leadless SMT Package stages onto a module to allow for a compact system design and requires very few external components for operation. The amplifier is bias adjustable allowing the amplifiers power consumption to be optimized. The TQP9107 is available in a lead-free/RoHS-compliant 13-pin 3.5x4.5mm Product Features surface mount package and is pin-compatible to the higher 600960 MHz Frequency Range frequency band version in the family with the TQP9108 (1.70-2.17 GHz). 35.5 dB gain +46dBm Output IP3 at Pout=+24dBm/tone 31% PAE at +27dBm Pout Internally Matched Integrated Inter-Stage Matching Bias Adjustable Functional Block Diagram Low idle current Applications Wireless Infrastructure Repeaters, Boosters, DAS High Power Amplifiers Small cell BTS Top View Ordering Information Part No. Description TQP9107 699 960MHz Power Amplifier TQP9107-PCB Evaluation Board Datasheet, November 10, 2020 Subject to change without notice - 1 of 13 - www.qorvo.com TQP9107 600 960 MHz 2-stage Power Amplifier Absolute Maximum Ratings Recommended Operating Conditions Parameter Rating Parameter Min Typ Max Units Storage Temperature 55 to +150C VCC +4.3 +5.0 V RF Input Power, CW, 50, T=25C +7 dBm V +3.9 V V BIAS CC Supply Voltage (V ) +6 V V , V +4.0 V V CC PD1 PD2 CC Exceeding any one or a combination of the Absolute Maximum Rating T 40 +105 C CASE conditions may cause permanent damage to the device. Extended 6 Tj for >10 hours MTTF +170 C application of Absolute Maximum Rating conditions to the device may reduce device reliability. Electrical specifications are measured at specified test conditions. Specifications are not guaranteed over all recommended operating conditions. Electrical Specifications (1) Parameter Conditions Min Typ Max Units Operational Frequency Range 600 960 MHz Test Frequency 849 MHz Gain 28.8 35.5 dB Noise Figure 5 dB Output P1dB 30.5 dBm Output IP3 Pout=+23dBm/tone, f=600kHz +43 +46 dBm IMD3, IMD5, IMD7 All power levels23dBm/tone 17 dBm Current, I Pout=+27dBm 370 mA CC Power Added Efficiency Pout=+27dBm 31 % Idle Current No RF Input Power 84 mA Pout = P1dB, Signal: CW 10:1 All Phases VSWR Survivability Pout = +28dBm, All Phases 6:1 Signal: 20 MHz LTE 1C, PAR = 9.5dB Thermal Resistance, jc Junction to backside GND paddle 30.1 C/W Notes: 1. Test conditions unless otherwise noted: V =+4.3 V, V = V = +4.0 V, Temp=+25C, 50 system. CC PD1 PD2 Datasheet, November 10, 2020 Subject to change without notice - 2 of 13 - www.qorvo.com