D1U54P-12-CONC Murata

D1U54P-12-CONC ACAN-64 Connector Card Application Note OVERVIEW The D1U54P-12-CONC (4407001-1) interface connector card is a dual card that is intended to interconnect the output voltages and signals of two D1U54x Series power modules for laboratory/bench level evaluation of the product. The outputs are capable of being parallel connected and a common ISHARE bus is provided to ensure that both power modules share current within specified limits. The Interface Card is capable of operation from standby voltages of 3.3V, 5V and 12V (provided by the D1U54x variant under test) without any reconfiguration. It is designed and intended to be used for the members within the following series (both AC and DC input source variants and both airflow options): 3.3VSTANDBY 5VSTANDBY 12VSTANDBY MODEL VARIANTS Output Output Output HB3xC D1U54x-x-650-12-HBxxC-xxx N/A N/A HB4xC HC3PC HA3PxC D1U54x-x-1200-12-HxxxxC N/A HC4PC HA4PxC HC3C HA3C D1U54x-x-1500-12-HxxxC HB4xC HC4C HA4C End Users can also use this card in their applications as an alternative to a host system power/mid or interposer plane (consult Murata Sales for details). SAFETY PRECAUTION The D1U54P-12-CONC output connector card is intended to facilitate the connection of the output supply rails of the power module. As such there a high energy source exposed on the output connector card please take the necessary safety precautions during the use of this connector card for product evaluation. IMAGES D1U54P-12-CONC Component Side (Top) View SCHEMATIC D1U54P-12-CONC www.murata-ps.com/support 08 Feb 2016 ACAN64.A01 Page 1 of 6 D1U54P-12-CONC ACAN-64 Connector Card Application Note www.murata-ps.com/support 08 Feb 2016 ACAN64.A01 Page 2 of 6