TAT7460 75 CATV 16.5dB Gain 50-2600MHz Amplifier 5 Product Overview The TAT7460 is a GaAs pHEMT single ended RF amplifier IC featuring 16.5dB of flat gain. This IC is design to support CATV application from 50 to 2600MHz using a single 5V supply. The TAT7460 is offered in a SOT-89 package for convenient layout and design in set top and infrastructure projects for 75 CATV and satellite applications. SOT-89 Package Key Features 502600MHz bandwidth 2.4dB Noise Figure <1600MHz Extremely Flat Gain Response Low Power Consumption: 100mA at 5V Functional Block Diagram Applications CATV Distribution Amplifiers Multi-Dwelling Units Drop Amplifiers Single-ended Gain Blocks FTTH Receivers Ordering Information Part Number Ordering Info Description 1074914 75 pHEMT Amplifier TAT7460 Sample TAT7460 1074911 1,000 pieces on 7 Reel TAT7460 EVB 1074915 502600MHz Evaluation Board Data Sheet Rev A, August 31, 2021 - 1 of 12 - www.qorvo.com Subject to change without notice All rights reserved TAT7460 75 CATV 16.5dB Gain 50-2600MHz Amplifier 5 Recommended Operating Conditions Absolute Maximum Ratings Parameter Rating Unit Parameter Min Typ Max Storage Temperature 65 to +150C s Device Voltage (VDD) 4.5 5.0 6.5 V Device Voltage (VD) +10.0 V Device Current (I ) 100 120 mA DD Exceeding any one or a combination of the Absolute Maximum Rating conditions may cause permanent damage to the device. Extended Case Temperature 0 +85 C application of Absolute Maximum Rating conditions to the device may 6 reduce device reliability. Tj for >10 hours MTTF +150 C Electrical specifications are measured at specified test conditions. Specifications are not guaranteed over all recommended operating conditions. Electrical Specifications (1) Parameter Conditions Min Typical Max Units Operational Frequency 50 2600 MHz Range Gain 16.1 16.5 dB Gain Flatness +/- 0.5 dB Input Return Loss 18 dB Output Return Loss 18 dB CSO -61 dBc 30 dBmV/channel at output CTB -72 dBc 80 channels flat XMOD -71 dBc Pout = +5 dBm/tone Output IP2 +56.2 +58 dBm f = 6 MHz, 325MHz Output IP3 +31.1 +36 dBm Output P1dB +20.5 dBm Noise Figure 501600 MHz 2.5 dB Device Current (IDD) 100 120 mA Thermal Resistance, jc Junction to case 51 C/W Notes: 1. Test conditions unless otherwise noted: VDD = +5.0V, Temp=+25C, Freq=502600MHz Data Sheet Rev A, August 31, 2021 - 2 of 12 - www.qorvo.com Subject to change without notice All rights reserved