2-CHANNEL BUTTON RADIO TRANSMITTER RNK-02 INSTRUCTION MANUAL ZAMEL Sp. z o.o. ul. Zielona 27, 43-200 Pszczyna, Poland tel. +48 (32) 210 46 65, fax +48 (32) 210 80 04 www.zamelcet.com, e-mail: marketing zamel.pl DESCRIPTION TECHNICAL DATA RNK-02 button radio transmitter is an RNK-02 EXTA FREE wireless control, radio device. It is used to realise control functions: switch- Input rated voltage: 3 V DC ing on, switching off, brightening/dimming, Battery type: CR2032 putting up/down roller blinds, time opera- Battery working life: 3 5 years (depending on use) tion mode. The transmitter can be mounted Number of channels: 2 on any surface including glass, wood, etc. Transmission: radio 868,32 MHz thanks to its little size and weight, and ex- Transmission way: unidirectional ternal power supply which is not necessary. Coding: addressing transmission Range: up to 250 m in the open area FEATURES: Optical signalling of transmission/battery discharge: LED red diode 2-channel button radio transmitter, o Ambient temperature range: -10 +55 C remote control of EXTA FREE receivers, Operating position: free possibility of independent control of two Casing mounting: wall plugs, double-sided adhesive tape receivers, wide range of operation (up to 250 m), Casing protection degree: IP20 (EN 60529) battery powered, Protection level: III easy installation and mounting possibility Pollution degree: 2 in any place, Dimensions: 90 x 80 x 11,5 mm sending information and battery status are Weight: 0,038 kg optically signalled, Reference standard: ETSI EN 300 220-1, possibility of simultaneous switching ETSI EN 300 220-2 on / off of any number of EXTA FREE receivers. APPEARANCE Optical signalling of transmitters operation Button Base The symbol means selective collecting of electrical and electronic equipment. It is forbidden to put the used equipment together with other waste. VER. 004 20.05.2011MOUNTING, FUNCTIONING By pressing the button, the transmitter sends a signal with 868,32 MHz frequency which controls EXTA FREE receivers. Device pro- gramming procedure (adding a transmitter to a receivers memory) is described in particular EXTA FREE manual instructions. The device range (up to 250 m depending on a receiver) can be increased by means of a retransmitter or few RTN-01 retransmitters. The device can be mounted in any place by means of double-sided adhesive tape or wall plugs 5 x (3 x 30) mm. Mounting by means of wall plugs: 1. Remove the button - to do it press the button on one side, and on the other side put a screwdriver into a slot and lift up the button (Fig. 1) 2. Find a place on the wall to mount the transmitter, make two holes corresponding mounting holes from the transmitters base. 3. Set wall plugs in the holes. 4. Fix the base by means of screwing screws into wall plugs. . 1 5. Place the button again. BATTERY CHANGE Battery discharge status is signalled by several LED red diode flashes during transmission time. 1. Remove the button (Fig. 1). 2. By means of a screwdriver lever up the printed- circuit board releasing the bottom latch (Fig. 2), and remove it from the base. 3. Remove the battery from the latch (Fig. 3). 4. Mount a new battery. Watch battery polarisation marked on the latch. Wrong battery mounting may cause device damage. 5. Put the removed printed-circuit board back . 2 . 3 in the base. 6. Put the button back. CAUTION: While changing the battery, it is suggested to press any of the buttons for about 5 seconds before putting it into a latch. Next press transmission button several times to check its operation. If the transmitter does not work properly repeat the battery change procedure. APPLICATION RNK-02 button radio transmitter controls radio lighting switch operation RWL-01 (switch on/switch off), radio receiver ROP-01 (switch on/switch off), or remote control socket RWG-01 (switch on/switch off). The ZAMEL company devices which are characterised with this sign can cooperate with each other. COOPERATION AND OPERATION RANGE Symbol ROP-01 ROP-02 ROB-01 SRP-02 SRP-03 RWG-01 RWL-01 ROM-01 ROM-10 RDP-01 RTN-01 RNK-02 180 m 200 m 200 m 200 m 200 m 250 m 180 m 250 m 250 m 180 m 250 m RNK-04 180 m 200 m 200 m 200 m 200 m 250 m 180 m 250 m 250 m 180 m 250 m CAUTION: The given range concerns open area - an ideal condition without any natural or artificial obstacles. If there are some obstacles between a transmitter and a receiver, it is advisable to decrease the range according to: wood and plaster - from 5 to 20, bricks - from 10 to 40 %, reinforced concrete - from 40 to 80%, metal - from 90 to 100% , glass - from 10 to 20%. Over- and underground medium and high electrical power lines, radio and television transmitters, GSM transmitters set close to a device system have also a negative influence on the range. WARRANTY CARD There is 24 months guarantee on the product 1. ZAMEL provides a two-year warranty for its products. 2. The ZAMEL warranty does not cover: a) mechanical defects resulting from transport, loading / unloading or other circumstances b) defects resulting from incorrect installation or operation of ZAMEL products c) defects resulting from any changes made by CUS- TOMERS or third parties, to products sold or equipment necessary for the correct operation of products sold d) defects resulting from force majeure or other aleatory events for which ZAMEL is not liable e) power supply (batteries) to be equipped with a device in the moment of sale (if they appear) 3. All complaints in relation to the warranty must be provided by the CUSTOMER in writing to the retailer after discovering a defect. 4. ZAMEL will review complaints in accordance with existing regulations. 5. The way a complaint is settled, e.g. replacement of the product, repair or refund, is left to the discretion of ZAMEL. 6. Guarantee does not exclude, does not limit, nor does it suspend the rights of the PURCHASER resulting from the discrepancy between the goods and the contract. Salesman stamp and signature, date of sale VER. 004 20.05.2011