ZSPM1035C / True Digital PWM Controller ZSPM1035D (Single-Phase, Single-Rail) Datasheet Brief Description Benefits The ZSPM1035C and ZSPM1035D are true-digital Fast time-to-market using off-the-shelf, optimally single-phase PWM controllers optimally configured configured controller and power block for use with the Murata Power Solutions 35A Power Fast configuration and design flexibility Block OKLP-X/35-W12-C in smart digital power Simplified design and integration solutions. FPGA designer-friendly solution The ZSPM1035C and ZSPM1035D integrate a digi- Highest power density with smallest footprint tal control loop, optimized for maximum flexibility and Pin-to-pin compatible with the ZSPM1035A PWM stability as well as load step and steady-state perfor- controller enabling point-of-load platform designs mance. In addition, a rich set of protection functions with or without digital communication is provided. Higher energy efficiency across all output loading To simplify the system design, a set of optimized conditions configuration options have been pre-programmed in the devices. These configurations can be selected by setting the values of two external resistors. Available Support Reference solutions are available complete with Evaluation Kit layout recommendations, example circuit board Reference Solutions layouts, complete bill of materials and more. PC-based Pink Power Designer Graphic User Interface (GUI) Features Application-optimized digital control loop Physical Characteristics Advanced, digital control techniques Operation temperature: -40C to +125C Tru-sample Technology ZSPM1035C V : 0.62V to 1.20V OUT State-Law Control (SLC) ZSPM1035D V : 1.25V to 3.40V OUT Sub-cycle Response (SCR) Lead free (RoHS compliant) 24-pin QFN package Improved transient response and noise immunity (4mm x 4mm) Protection features Over-current protection ZSPM1035C/D Typical Application Diagram Over-voltage protection (VIN, VOUT) ZSPM1035 Murata Under-voltage protection (VIN, VOUT) QFN 4x4 mm OKLP-X/35-W12-C Overloaded startup Current Sensing Continuous retry (hiccup) mode for fault VIN 12V typical conditions Digital Control Loop Pre-programmed for optimized use with Murata Power Solutions 35A Power Block OKLP-X/35- Power Management W12-C Driver (Sequencing, Protection,) Driver VOUT 2-pin configuration for loop compensation, output voltage, and slew rate. Operation from a single 5V or 3.3V supply Housekeeping and Communication 2016 Integrated Device Technology, Inc. 1 January 25, 2016 ZSPM1035C / True Digital PWM Controller ZSPM1035D (Single-Phase, Single-Rail) Datasheet Current Sensing ZSPM1025C/D Block Diagram ISNSP Average Current Sensing ISNSN Digital Control Loop VFBP VFB PWM FLASH Adaptive Digital PWM VFBN ADC Controller LSE DAC OC Detection Typical Applications Sequencer Telecom Switches OV Detection Servers and Storage DAC Configurable OT Detection Error Handler Base Stations Vin OV/UV Detection Network Routers Bias Int. Temp Current Sense VREF VREFP Source Industrial Applications Vout UV Detection FPGA Designs 1.8V Reg AVDD18 TEMP Analog NVM Point-of-Load Power Solutions CONFIG0 HKADC CPU Core (OTP) CONFIG1 1.8V Reg Telecommunications VDD18 VIN Digital Single-Rail/Single-Phase GPIO Supplies for Processors, Clock 3.3V VDD33 Generation Reg ASICs, DSPs, etc. Ordering Information Sales Code Description Package ZSPM1035CA1W 0 ZSPM1035C Lead-free QFN24 Temperature range: -40C to +125C 7 Reel ZSPM1035DA1W 0 ZSPM1035D Lead-free QFN24 Temperature range: -40C to +125C 7 Reel ZSPM8735-KIT Evaluation Kit for ZSPM1035C with PMBus Communication Interface * Kit ZSPM8835-KIT Evaluation Kit for ZSPM1035D with PMBus Communication Interface * Kit * Pink Power Designer GUI for kit can be downloaded from the IDT web site at www.IDT.com/ZSPM1035C or www.IDT.com/ZSPM1035D. Corporate Headquarters Sales Tech Support 6024 Silver Creek Valley Road 1-800-345-7015 or 408-284-8200 www.IDT.com/go/support San Jose, CA 95138 Fax: 408-284-2775 www.IDT.com www.IDT.com/go/sales DISCLAIMER Integrated Device Technology, Inc. (IDT) reserves the right to modify the products and/or specifications described herein at any time, without notice, at IDT s sole discretion. Performance specifications and operating parameters of the described products are determined in an independent state and are not guaranteed to perform the same way when installed in customer products. The information contained herein is provided without representation or warranty of any kind, whether express or implied, including, but not limited to, the suitability of IDT s products for any particular purpose, an implied warranty of merchantability, or non-infringement of the intellectual property rights of others. This document is presented only as a guide and does not convey any license under intellectual property rights of IDT or any third parties. IDT s products are not intended for use in applications involving extreme environmental conditions or in life support systems or similar devices where the failure or malfunction of an IDT product can be reasonably expected to significantly affect the health or safety of users. Anyone using an IDT product in such a manner does so at their own risk, absent an express, written agreement by IDT. Integrated Device Technology, IDT and the IDT logo are trademarks or registered trademarks of IDT and its subsidiaries in the United States and other countries. Other trademarks used herein are the property of IDT or their respective third party owners. For datasheet type definitions and a glossary of common terms, visit www.idt.com/go/glossary. All contents of this document are copyright of Integrated Device Technology, Inc. All rights reserved. 2016 Integrated Device Technology, Inc. 2 January 25, 2016 ADCVREF GPIO0 PGOOD CONTROL GPIO1 GPIO2 GPIO3 VDD50