600V High Voltage 3 Phase Bridge Driver BS2130F-G General Description Key Specifications The BS2130F is a monolithic bridge driver IC, which can High-side floating supply voltage: 600V drive N-channel power MOSFET and IGBT driver in 3 Output voltage range: 11.5 ~ 20V phase systems with bootstrap operations. Min Output Current Io+/Io-: 200mA/350mA(Typ) The floating channel can be used to driven an N-channel OCP detect voltage 0.46V(Typ) power MOSFET or IGBT in the high side configuration OCP blanking time 150ns(Typ) which operates up to 600V. Turn On/Turn Off: 630/580ns(Typ) The logic inputs can be used 3.3V and 5.0V. Offset supply leakage current: 50A (Max) To provide a protection circuit, the device Includes an Operating temperature range: -40C ~+125C Under Voltage Lockout (UVLO) circuit and an Over Current Protection (OCP) circuit. Package W(Typ) x D(Typ) x H(Max) The UVLO circuit prevents malfunction when VCC and SOP-28 18.50mm x 9.90mm x 2.41mm VBS are lower than the specified threshold voltage. Features Floating Channels for Bootstrap Operation to +600V Gate drive supply range from 11.5V to 20V Built-in Under Voltage Lockout for Both Channels The device includes an Over Current Protection circuit Built-in Enable Channel (EN) which enable I/O functionality Built-in FAULT Channel (/FAULT) which indicates over current and under voltage RCIN Channel can determine the OCP holding time by external resistance and capacitance 3.3V and 5.0V input logic compatible Output in phase with input Applications MOSFET and IGBT high side driver applications Typical Application Circuit U p to 6V C C B1 2 3 H N 1 2 3 N 1 2 3 H1 2 3 TO L O D S1 2 3 FA E N RCN 1 2 3 RP C SS Figure 1. Typical Application Circuit Product structures>Silicon monolithic integrated circuit This product is not designed for protection against radioactive rays .w ww.rohm.com TSZ02201-0Q3Q0BZ00520-1-2 2016 ROHM Co., Ltd. All rights reserved. 1/27 TSZ22111 14 001 02.Feb.2017 Rev.003 BS2130F-G Pin Configuration (TOP VIEW) V CC VB 1 HIN 1 HO 1 HIN 2 VS1 HIN3 N. C VB 2 LIN 1 LIN 2 HO 2 LIN3 VS 2 FA UL . C N IR IP VB 3 EN HO3 R CIN VS 3 VSS N. C 1 CO LO LO 3 LO 2 Figure 2. Pin Configuration Pin Description Pin No. Symbol Function Low side supply voltage 1 VCC Logic input for high side gate driver outputs (HO1,2,3), in phase 2,3,4 HIN1,2,3 Logic input for low side gate driver outputs (LO1,2,3), in phase 5,6,7 LIN1,2,3 Indicates over current or low side undervoltage (negative logic, open-drain output) 8 /FAULT Analog input for over-current shutdown, activates FAULT and RCIN to VSS 9 ITRIP Logic input to enable I/O functionality (positive logic) 10 EN 11 RCIN External RC-network to define FAULT clear delay after the t HOLD 12 VSS Logic Ground 13 COM Power Ground 14,15,16 LO1,2,3 Low side gate drive outputs 18,22,26 VS1,2,3, High side floating supply return 19,23,27 HO1,2,3 High side gate drive outputs 20,24,28 VB1,2,3 High side floating supply 17,21,25 N.C Non-Connection www.rohm.com 2016 ROHM Co., Ltd. All rights reserved. TSZ02201-0Q3Q0BZ00520-1-2 2/27 TSZ22111 15 001 02.Feb.2017 Rev.003